manualshive.com logo in svg

Samsung CLP-510/XBH, Руководство по обслуживанию

Принтер Samsung CLP-510/XBH - надежное устройство для печати высокого качества. Если вам нужна помощь с настройкой или ремонтом, скачайте бесплатное Руководство по обслуживанию на manualshive.com. Этот мануал поможет вам решить любые проблемы с вашим принтером.

Поделиться
Скачать
background image

1-2

Precautions

Service Manual

1.2 Caution for safety

1.2.1 Toxic material

This product contains toxic materials that could cause illness if ingested.

(1) If the LCD control panel is damaged it is possible for the liquid inside to leak. This liquid is toxic. Contact with the skin

should be avoided, wash any splashes from eyes or skin immediately and contact your doctor. If the liquid gets into
the mouth or is swallowed see a doctor immediately.

(2) Please keep toner cartridges away from children. The toner powder contained in the toner cartridge may be harmful

and if swallowed you should contact a doctor.

1.2.2 Electric Shock and Fire Safety Precautions

Failure to follow the following instructions could cause electric shock or potentially cause a fire.

(1) Use only the correct voltage, failure to do so could damage the printer and potentially cause a fire or electric

shock.

(2) Use only the power cable supplied with the printer. Use of an incorrectly specified cable could cause the cable

to overheat and potentially cause a fire.

(3) Do not overload the power socket, this could lead to overheating of the cables inside the wall and could lead to

a fire.

(4) Do not allow water or other liquids to spill into the printer, this can cause electric shock. Do not allow paper

clips, pins or other foreign objects to fall into the printer these could cause a short circuit leading to an electric
shock or fire hazard..

(5) Never touch the plugs on either end of the power cable with wet hands, this can cause electric shock. When

servicing the printer remove the power plug from the wall socket.

(6) Use caution when inserting or removing the power connector. The power connector must be inserted com-

pletely otherwise a poor contact could cause overheating possibly leading to a fire. When removing the power
connector grip it firmly and pull.

(7) Take care of the power cable. Do not allow it to become twisted, bent sharply round corners or other wise 

damaged. Do not place objects on top of the power cable. If the power cable is damaged it could overheat and
cause a fire or exposed cables could cause an electric shock. Replace a damaged power cable immediately,
do not reuse or repair the damaged cable. Some chemicals can attack the coating on the power cable, 
weakening the cover or exposing cables causing fire and shock risks.

(8) Ensure that the power sockets and plugs are not cracked or broken in any way. Any such defects should be

repaired immediately. Take care not to cut or damage the power cable or plugs when moving the machine.

(9) Use caution during thunder or lightening storms. Samsung recommend that this machine be disconnected from

the power source when such weather conditions are expected. Do not touch the machine or the power cord if it
is still connected to the wall socket in these weather conditions.

(10) Avoid damp or dusty areas, install the printer in a clean well ventilated location. Do not position the machine

near a humidifier. Damp and dust build up inside the machine can lead to overheating and cause a fire.

(11) Do not position the printer in direct sunlight. This will cause the temperature inside the printer to rise possibly

leading to the printer failing to work properly and in extreme conditions could lead to a fire.

(12) Do not insert any metal objects into the machine through the ventilator fan or other part of the casing, it could

make contact with a high voltage conductor inside the machine and cause an electric shock.

Содержание CLP-510/XBH





































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CLP-510/XBH

VASTEX V-1000 Installation And Operating Insctructions preview
V-1000
Бренд: VASTEX Страницы: 2
Canon imagePROGRAF GP-540 Setup Manual preview
imagePROGRAF GP-540
Бренд: Canon Страницы: 82
Xerox DocuPrint C2200 User Manual preview
DocuPrint C2200
Бренд: Xerox Страницы: 200
Konica Minolta bizhub 160 Service Manual preview
bizhub 160
Бренд: Konica Minolta Страницы: 20
Xerox WorkCentre 7655 Evaluator Manual preview
WorkCentre 7655
Бренд: Xerox Страницы: 24
Tektronix PHASER 6200 Help Manual preview
PHASER 6200
Бренд: Tektronix Страницы: 42
Olivetti FS-519 Service Manual preview
FS-519
Бренд: Olivetti Страницы: 111
Citizen CZ-01 User Manual preview
CZ-01
Бренд: Citizen Страницы: 32
Oki MICROLINE ML310 Handbook preview
MICROLINE ML310
Бренд: Oki Страницы: 32
SANEI ELECTRIC SK1-21 Technical Manual preview
SK1-21
Бренд: SANEI ELECTRIC Страницы: 60
Variquest Perfecta 2400STP Assembly Instructions Manual preview
Perfecta 2400STP
Бренд: Variquest Страницы: 12
DNP WPS Pro EU User Manual preview
WPS Pro EU
Бренд: DNP Страницы: 93
Xprinter XP-470 Series User Manual preview
XP-470 Series
Бренд: Xprinter Страницы: 40
Sam4s ELLIX50 User Manual preview
ELLIX50
Бренд: Sam4s Страницы: 24
DNP DS-ID400 Settings Manual preview
DS-ID400
Бренд: DNP Страницы: 10
Canon Arizona 1300 Technical Manual preview
Arizona 1300
Бренд: Canon Страницы: 50
Canon imagePRESS V1000 Customer Expectation Document preview
imagePRESS V1000
Бренд: Canon Страницы: 123
Cellink 000000020356 User Manual preview
000000020356
Бренд: Cellink Страницы: 48

Бренды по названию

Популярные бренды

Загрузить еще бренды