manualshive.com logo in svg

Samsung CLP 500, Руководство по установке

Поделиться
Скачать
Samsung CLP 500 Скачать руководство пользователя страница 189

S

OLVING

 P

ROBLEMS

7.

21

7

9

Slide the tray back into the printer and close the two jam 
covers. 

10

Open and close the right cover. The printer resumes 
printing. 

Tips for Avoiding Paper Jams

By selecting the correct paper types, most paper jams can be 
avoided. If a paper jam occurs, follow the steps outlined in 
“Clearing Paper Jams” on page 7.7. 

• Follow the procedures on page 3.4. Ensure that the adjustable 

guides are positioned correctly.

• Do not overload the paper tray. Ensure that the paper is below 

the paper limit mark on the inside wall of the tray.

• Do not remove the paper from the tray while printing.

• Flex, fan and straighten the paper before loading. 

• Do not use creased, damp or curled paper.

• Do not mix paper types in the tray.

• Use only recommended print materials. See “Paper 

Specifications” on page G.4.

• Ensure that the print side is facing down when loading paper 

in the tray and in the Multi-purpose Tray.

Содержание CLP 500


































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды