Samsung CLP-36x Series, Руководство пользователя

Страница: 123 / 202

Wireless network setup
123
2. Using a network-connected machine
IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your machine
using its MAC address to communicate with the machine. The MAC address is
the hardware serial number of the network interface and can be found in the
Network Configuration Report .
See "Setting IP address" on page 96.
Configuring the machine’s wireless network
Before starting you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
To configure wireless parameters, you can use SyncThru™ Web Service .
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable connection
status.
1
Check whether or not the network cable is connected to the machine. If
not, connect the machine with a standard network cable.
2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine’s new IP address in the browser window.
For example,
3
Click Login on the upper right of the SyncThru™ Web Service website.
4 If it’s your first time logging into SyncThru™ Web Service you need to
log-in as an administrator. Type in the below default ID and password
.
We recommend you to change the default password for security
reasons.
• ID: admin
• Password: sec00000
5 When the SyncThru™ Web Service window opens, click Network
Settings .
6 Click Wireless > Wizard .
Wizard will help you setup the wireless network configuration. However, if
you want to set the wireless network directly, select Custom .