Samsung CL29Z50MQ9XXAZ, Руководство по обслуживанию

Страница: 42 / 73

Leandro Palmeira
Leandro Palmeira
Troubleshooting
4-26 Samsung Electronics
5. Enter Video Adjust1 of Service Mode. Adjust Low/Light.
- Adjust Sub Bright to set Y.
- Adjust B Cutoff to set y.
- Adjust R Cutoff to set x.
6. Enter Video Adjust1 of Service Mode. Adjust High/Light.
- Adjust Sub Contrast to set Y.
- Adjust B Drive to set y.
- Adjust R Drive to set x.
7. Check Low/Light and readjust it if its value has been changed.
8. If you have readjusted Low/Light, readjust High/Light until the two values are identical to the coordinates of the corresponding
model.
※
White Balance Standard Data
No Item Data Required Adjustment
1
White Balance
x: 275 ± 5 y: 275 ± 5 Y: 30 ± 3
White Balance (Standard Data)
x: 265 ± 5 y: 265 ± 5 Y: 1.5 ±0.2
■
Check List for the Screen Voltage and White Balance Adjustment
1. The Screen Voltage and White Balance are connected to each other, and both of them have to be configured to the correct
values.
2. Adjust the White Balance after the Screen Voltage was adjusted, and check if the Screen Voltage is normal after adjusting the
White Balance.
3. If the White Balance is readjusted, check the Screen Voltage again.
4. When the adjustment is finished, check the following checklist.
- f there is a spot on the screen when turning the TV set off/on, adjust the Screen Voltage again.
- f there is a ghost line on the screen, adjust the Screen Voltage again.