O
P E R AT I O N
C
HAPTER
T
HREE
: TV O
PERATION
3
.9
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-
ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear
next to the channel number.
1
Press the
CH
▲
or
CH
▼
button
to tune to the channel that will
be labeled.
2
Press the
MENU
button to dis-
play the menu, then press the
CH
▼
button to select
“Channel”.
Press the
VOL +
button.
Labeling
: ----
3
Press the
CH
▼
button to select
“Labeling”.
Press the
VOL +
button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields.
See top paragraph.)
Labeling
: ----
4
Press the
CH
▲
or
CH
▼
button
to select a letter, a number, “*”,
or a blank. (Pressing the
CH
▲
button results in this sequence:
A,B,...Z,*, blank,0,1,...9).
▼
Note: You cannot select
“Labeling” in the A/V mode.
5
Press the
VOL+
button to
switch to the next field, which
will be highlighted. Select a
second letter or digit using the
CH
▲
and
CH
▼
buttons, as
above. Repeat the process to
select the last two digits.
Labeling
: CNN1
Press the
MENU
button to set the label and clear the menus from
the screen.
02585C(E)-CHAPTER 3 2/7/03 9:35 AM Page 9
