9
EN
Power Levels and Time Variations
The power level function enables you to adapt the amount of energy
dissipated and thus the time required to cook or reheat your food,
according to its type and quantity. You can choose between six power
levels.
The cooking times given in recipes and in this booklet correspond to the
specific power level indicated.
Stopping the Cooking
You can stop cooking at any time so that you can:
•
Check the food
•
Turn the food over or stir it
•
Leave it to stand
Adjusting the Cooking Time
You can increase the cooking time by pr30s button once for each
30seconds to be added.
•
Check how cooking is progressing at any time simply by
opening the door
•
Increase the remaining cooking time
Using the Auto Cook Feature
The five Auto Cook(
) features include/provide pre-programmed
cooking times. You do not need to set either the cooking times or the power
level.
You can adjust the size of the serving by turning the dial knob.
Use only recipients that are microwave-safe.
Open the door. Place the food in the centre of the turntable. Close the
door.
Power Level
Percentage
Output
HIGH
MEDIUM HIGH
MEDIUM
MEDIUM LOW
DEFROST
LOW
100 %
67 %
50 %
33 %
20 %
11 %
900 W
600 W
450 W
300 W
180 W
100 W
If you select a...
Then the cooking time must be...
Higher power level
Lower power level
Decreased
Increased
To stop the cooking...
Then...
Temporarily
Open the door.
Result:
Cooking stops.
To resume cooking, close the door again and press
the
Start
(
) button.
Completely
Press the
Stop
(
) button.
Result:
Cooking stops.
If you wish to cancel the cooking settings, press the
Stop
(
) button again.
To increase the cooking time of your food, press the
Start
(
) button once for each 30 seconds that you wish to
add.
•
Example: To add three minutes, press the
Start
(
)
button six times.
1.
Press the
Auto Cook
(
) button.
2.
Select the type of food that you are cooking by pressing
the
Auto Cook
(
) button. Refer to the table on the
following page for a description of the various pre-
programmed settings.
3.
Select the size of the serving by turning the
dial knob
.
4.
Press the
Start
(
) button.
Result:
The food is cooked according to the pre-
programmed setting selected.
When cooking has finished, the oven will beep
and flash “0” four times. The oven will then
beep one time per minute.
jlXW^iTil|TWZ[_]oluUGGwG`GG~ SGhGYZSGYWW_GGYaXXGwt
