background image

27

Correct posture to use the product

Use the product in the correct posture as follows:

 

Straighten your back.

 

Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the 
screen.

 

Keep your eyes directly in front of the screen.

 

Adjust the angle so light does not reflect on the screen.

 

Keep your forearms perpendicular to your upper arms and level with the back of your hands.

 

Keep your elbows at about a right angle.

 

Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels 
attached to the floor, and your arms lower than your heart.

 

Do the Eye excercises or blink frequently,then eye fatigue will be relieved.

Driver Installation

 

You can set the optimum resolution and frequency for this product by installing the corresponding drivers.

 

To install the latest version of the product driver, download it from the Samsung Electronics website at http://
www.samsung.com.

Setting Optimum Resolution

An information message about setting optimum resolution will appear if you power on the product for 
the first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.

 

If the optimum resolution is not selected, the message will appear up to three times for a specified time even 
when the product is turned off and on again.

 

The optimum resolution can also be selected in 

Control Panel

 on your PC.

Содержание C34J791WT Series

















































Отзывы: