16
Installation
Attaching the Stand
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Place the protective Styrofoam (cushion) included in the
package on the floor and place the product facing down on
the Styrofoam, as shown in the image.
―
Make sure to use the styrofoam (cushion) that came with the
monitor.
2
While holding the monitor, push in the stand neck in the
direction of the arrow, as shown in the image.
3
While holding the monitor, lift the stand neck in the direction
of the arrow and adjust it, as shown in the image.
4
Attach the stand base to the stand neck, and then fasten the
two screws on the base to tightly fix it.
- Caution
Do not hold the product upside down only by the stand.
- Caution
Do not press down on the monitor. There is a risk of damaging
the monitor.
