Specifications
Category
SE-W164C
External DVD±R/RW Drive
DISC
Usable Discs
DVD
:DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM,
DVD-Video, DVD+R (Dual), DVD-R (Dual)
CD
: CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G)
CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD
CD-I, CD-I Bridge (Photo-CD, Video-CD),
Multisession CD (Photo-CD, CD-EXTRA, Portforio)
Disc Diameter
4.72 Inch or 3.15 Inch (120mm or 80mm)
Interface Support
Interface Port
USB 2.0
ACCESS TIME
(Random)
CD-ROM
110ms (Random)
DVD-ROM
130ms (Random)
Data Transfer Speed
(Max)
Media Type
Write
Read
DVD+R
PCAV 16X (21.6MB/sec)
CAV 12X (16.2MB/sec)
DVD+RW
Z-CLV 8X (10.8MB/sec)
CAV 8X (10.8MB/sec)
DVD+R DUAL
Z-CLV 5X (6.75MB/sec)
CAV 8X (10.8MB/sec)
DVD-R DUAL
Z-CLV 4X (5.4MB/sec)
CAV 8X (10.8MB/sec)
DVD-R
PCAV 16X (21.6MB/sec)
CAV 12X (16.2MB/sec)
DVD-RW
Z-CLV 6X (8.1MB/sec)
CAV 8X (10.8MB/sec)
DVD-ROM(Single)
-
CAV 16X (21.6MB/sec)
DVD-ROM(Dual)
-
CAV 8X (10.8MB/sec)
CD-ROM
-
CAV 48X (7.2MB/sec)
CD-R
PCAV 48X (7.2MB/sec)
CAV 40X (6.0MB/sec)
US-RW
PCAV 32X (4.8MB/sec)
CAV 40X (6.0MB/sec)
HS-RW
CLV 10X (1.5MB/sec)
CAV 40X (6.0MB/sec)
CD-RW
CLV 4X (0.6MB/sec)
CAV 40X (6.0MB/sec)
Buffer Memory
2MB
Drive Installation
Horizontal / Vertical(cannot use 3.15 Inch(80mm) discs)
Operating
Environment
Temperature
41°F ~ 104 °F (5°c ~ 40°C)
Humidity
10% ~ 80% (RH)
Size(Width x Height x Length)
6.41 X 1.96 X 9.13 Inch (163 X 50 X 232mm)
Weight
1,200g
MTBF
125,000 POH(Duty 20%)
Note
Does not support DVD-R for Authoring.
Cannot playback or record on both sides of a two-sided disc simultaneously.
The read/write capacity of the supported discs depends on the condition of the disc
and the recording format of the drive. Therefore, the read/write quality may not be perfect.
Fcc information to the user
This equipment has been tested and found to comply with the limits for a class B digital device. pursuant
to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. this equipment generates.
Uses and can radiate radio frequency energy and. if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications However. there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception.
Wiich can be determined by tuming the equipment off and on. the user is encouraged to try to correct
the interference by one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or experienced radio TV technician for help.
CAUTION
Change or modifications not expressly approded by the manufacturer responslble for comliance could
void the user's authority to operate the equipment.
Laser Standand
IEC 60825-1 : 1993 + A1 : 1997 + A2 : 2001
product specifications above may be changed improve device performance without prior
notice.
The
