Samsung SRP-500 Setup & Service Information System Setup Guides
•
23
System Setup Guides
Samsung SRP-500/Samsung SPS 1000 Logo Setup
Guide
The Samsung SPS-1000 can take advantage of the two-color graphic logo printing capabilities
of the Sansung SRP-500. This document provides the SPS-1000 settings required to print the
SPS-500 graphic logo.
Printer Driver Selections
P R I N T E R D R I V E R S E L E C T I O N S
P R I N T E R T Y P E S T A R T C A N C E L
S A M S R P - 1 0 0 I N I T I A L I Z E
S A M S R P - 2 7 0
C O M P R E S S E D
S A M S R P - 3 5 0 R E D / R E V 1 B 6 7 0 1 1 B 7 2 0 0
C I T I Z E N 3 5 5 1 E X P A N D E D 1 B 2 1 2 1 I B 2 1 0 1
C I T I Z E N 8 1 0 B O L D 1 B 4 5 0 1 1 B 4 5 0 0
C I T I Z E N 2 3 0 U N D E R L I N E 1 B 2 D 0 1 1 B 2 D 0 0
E P S O N T 8 8 - 2 L O N G F E E D 1 B 6 4
E P S O N U 2 0 0 F U L L C U T I B 6 9
E P S O N U 2 9 5 P A R T . C U T 1 B 6 9
E P S O N U 3 0 0 S T A N D A R D
E P S O N U 3 2 5 L O G O 1 B 6 7 0 1
u
u
E S C E N T E R P A G E U P / D N
↑↓
1. Select PRINTER
DRIVER
SELECTIONS from
the S-MODE
PROGRAMMING
MENU to display the
PRINTER DRIVER
SELECTIONS
screen.
2. Select SAM SRP-
270.
3. Set the START and
CANCEL commands
as shown on the
screen at the right.
Note that the LOGO
start command is
1B6701 and the
Initialize command
should be deleted.
NOTE: Use the start command 1B6701 to print the first image loaded into the SRP-500.
Use the sequential commands, 1B6702 to 1B6710 to print the remaining 9 images that
may be stored in the SRP-500.
