English
39
05
Setup
Wired Network
Setting Up a Wired Connection - Auto
1.
Press the ▲▼ buttons to select
Wired
.
2.
Press the
ENTER
button.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
Setting Up a Wired Connection - Manual
If you have a static IP address or the Auto Setting
does not work, you’ll need to set the Network
Settings values manually.
To view your Network Settings values on most
Windows computers, follow these steps:
Windows xP
1.
Right click the Network icon on the bottom
right of the Windows desktop.
2.
In the pop-up menu, click Status.
3.
On the dialog that appears, click the Support
tab.
4.
On the Support tab, click the Details button.
The Network settings are displayed.
Windows 7
1.
Click the Network icon on the bottom right of
the Windows desktop.
2.
In the pop-up menu, click Network and
Sharing Centre.
3.
On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
4.
On the Support tab, click the Details button.
The Network settings are displayed.
✎
NOTE
`
Depending on your Windows version, the information
may differ.
To enter the Network settings into your product,
follow these steps:
1.
Press the ▲▼ buttons to select
Wired
, and
then press the
ENTER
button.
2.
Press the ◄► buttons to select
IP Settings
,
and then press the
ENTER
button.
3.
On the Network Status screen, select Cancel,
and then press Enter.
4.
Press the
ENTER
button to select
IP Mode
.
5.
Press the ▲▼ buttons to select
Manual
, and
then press the
ENTER
button.
6.
Press the ▼ button to go to the first entry field
(IP Address).
7.
Use the number buttons on your remote to
enter numbers.
8.
When done with each field, press the ►
button to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
9.
Enter the
IP Address
,
Subnet Mask
, and
Gateway
values.
10.
Press the ▼ button to go to
DNS Mode
.
11.
Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
12.
Press the
ENTER
button to select
OK
.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Network Settings
>
Move
"
Enter
'
Return
Select a network connection type.
Wired
Wireless
(general)
WPS(PBC)
One Foot
Connection
Connect to the network using a LAN cable. Please make
sure that the LAN cable is connected.
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
IP Settings
>
Move
"
Enter
'
Return
IP Mode
Manual
IP Address
0 . 0 . 0 . 0
Subnet Mask
0 . 0 . 0 . 0
Gateway
0 . 0 . 0 . 0
DNS Mode
Manual
DNS Server
0 . 0 . 0 . 0
OK
