Samsung BACnet Gateway MIM-B17N, Руководство пользователя

Страница: 15 / 208

E-
14
Set the current time of DMS2 system.
X
“2009/01/01 01:01:01” is factory setting. Set the current time as DMS2 system time.
You can set DMS2 time in [System Settings]
­
[System environment setting]
(Refer to page 117~118)
Starting DMS2
Current time setting
(1) Make sure that OnOff controller communication cables(R1, R2) or outdoor unit
communication cables(R1, R2) are connected.
X
For communication between DMS2 and OnOff controller/outdoor unit,
OnOff controller communication cable(R1, R2) or outdoor unit communication
cable (R1, R2) should be connected.
(2) Execute tracking.
X
DMS2 communicates with outdoor unit and brings information about installed
indoor unit and outdoor unit.
X After tracking, you can use indoor unit control and other menu.
X
For tracking, refer to [System Settings]
­
[Tracking] (Refer to page 140~152)
Connecting OnOff controller & outdoor unit
Starting DMS2
If DMS2 time does not set as the current time, DMS2 may cause malfunction when
using Schedule or control logic management.
uhzh†ktzY†tptTkWWhu†lu†pi†WZ^ZZhOXPU•‹‹GGGX[ YWXZTWZTX\GGG㝘䟸G[aZ_a[^