Cleaning and maintenance
Cleaning the sensor
When the air purifier is not operating, hold the left
and right edges of the back cover, pull it forward
slightly (
①
) and then lift it up (
②
) to separate it.
Carefully clean the lens and the odor sensor with a
cotton swap.
Dust sensor
Odor sensor
Insert the hooks of the back cover into the grooves at the bottom of the main body (
①
) and press the edges of the
back cover so that it fits into 8 holes(
②
).
①
②
Dust sensor
lens
Odor
sensor
Back cover
②
①
• Do not clean the sensors using volatile substances (alcohol, acetone, etc.). Use only water.
• If the dust sensor lens or the odor sensor is contaminated by a foreign substance (dust), the cleanness indicator
of the air purifier may be stuck in the polluted state. In this case, clean the sensors.
• Clean the sensors at least once every 6 months. However, cleaning period should be different depending on the
operating environment and the operating time. Therefore cleaning should be more often in places with lots of
dusts.
• Cleanness indicator on the control panel may not change from polluted state when the air purifier is operating
in place with heavy dusts or smells that may be beyond its capability. (In this case, open the window to ventilate,
or use the air purifier with appropriate capacity.)
• Do not use any spray type product near the air purifier.
• Turn off the power when cleaning the sensors. If you clean the sensors while the power is on, misdetection may
occur from the sensor and the cleanness indicator may not work properly.
CAUTION
ENGLISH-18
ACR_JUPITER-SI_MS_IB_04616A-02_EN.indd 18
2015-08-03 오전 9:26:25
