Solving Common Problems
E-
1
5
Before contacting the after-sales service, perform the following simple checks. They may save
you the time and expense of an unnecessary service call.
The air conditioner does not
operate at all
◆
Check that the circuit breaker used for the air conditioner has not
been triggered.
◆
Check that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
◆
Check that the operating mode indicator (COOL or FAN) on the unit is
lit up; if necessary press (On/Off) on the remote control or unit.
Problem
Explanation/Solution
The air conditioner does not
operate with the remote control
◆
Check that there are no obstacles between you and the unit.
◆
Replace the remote control batteries if necessary.
◆
Check that you are close enough to the unit (seven metres/yards
or less).
No beep is heard when you press
(On/Off) on the remote control
◆
Check that you are pointing the remote control at the remote
control sensor on the unit.
◆
Replace the remote control batteries if necessary.
The air conditioner does not cool
◆
Check that the correct operating mode has been selected COOL.
◆
The room temperature may be too low.
◆
Dust may be blocking the air filter; refer to page
14
for
cleaning instructions.
◆
Check that there is no obstacle blocking the air flow into or out of
the unit.
The timer is not correctly triggered
◆
Check that the timer has been programmed correctly;
see page 11~1
2
.
Odours are permeated in the
room during air conditioning
◆
Air the room.