E-
18
Selecting
Mode
mode helps users to fall asleep well after going to bed whether
being too hot to sleep or being awakened by coldness. The
mode can be
selected only when the air conditioner is switched on or off in cool/heat mode.
1
Press the
(On/Off) button.
Result
:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button to select
cool
or
heat
mode.
Result
:
The indoor unit beeps each time you press the
button.
The air conditioner runs in cool or heat mode.
3
Press the
button.
Result
:
The timer indicator is displayed.
The Off timer is blinking on the remote control.
4
To set the
Off timer, press the
buttons once or more times
until the required Off time is displayed.
Result:
The
mode will be automatically stopped in
8 hours if the operation time is not set.
You can set the Off timer by pressing the
buttons to
turn off the
mode automatically at the
appointed time within a range of 30 minutes to 12 hours.
Each time the
buttons are pressed, the time is
increased by 30 minutes or 1 hour.
mode will be
stopped at the appointed off time.
5
Press the
button.
Result
:
The remaining time is displayed.
Note
In the case of selecting
mode or adjusting the extra
time for
mode, you should press the
button
within 10 seconds. If you do not press the
button within
10 seconds,
mode will be canceled automatically.
6
Press the
button to adjust the temperature until the desired
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result
:
Each time you press the
button;
- The temperature adjusts by 1°C
- The indoor unit beeps
AVXWVH_IB_E_27626.indd 18
2007-4-2 16:23:15