Samsung ASV18PULNXEA, Руководство по обслуживанию, Страница: 82 / 110

12-1
7
DC_link voltage under/over error, Over voltage protection error/PFC over load
Indoor display ⊙ ○ ⊙ Outdoor error
Outdoor display ○ ● ⊙
DC_link voltage under/over error
Over voltage protection error
PFC over load
1.Checklist :
1) Is the input voltage of outdoor terminal block is normal?
2) Is the input voltage is higher than 300Vac?
3) Is the reactor wire connected?
3) Is the DC_link capacitor(A*V18***:CE101,CE102,CE103,A*V24***:CE001,CE002,CE003,CE004)) assembled in accordance the specification? (Outdoor PBA)
4) Is the DC_link resistor(A*V18***:R104,R106,R107,R108,A*V24***:R004,R005,R006,R007) value is normal? (Outdoor PBA)
2. Troubleshooting procedure
Is the connected of reactor wire?
(PBA-Reactor)
Is the DC_link sensing voltage(R104
or R004) is normal in opera ti on
mode?
Normal range (0.2Vdc~2.8Vdc)
YES
Exchange the Outdoor PBA
NO
Is the DC_link voltage (CE101 or
CE001) is normal in opera ti on
mode?
Normal range(280Vdc~320Vdc)
Check the input power
NO
YES
YES
Connect the reactor wire
NO
Restart a ft er power o ff .
Is the the input voltage is nomal?
Normal range(180Vac ~ 270Vac)
Restart a ft er power o ff .
Start the opera ti on (cooling mode or hea ti ng mode)
Check the input power in the powercord.
NO
YES
Exchange the Reactor
Is the reactor insula ti on damaged?
NO
Exchange the Outdoor PBA
YES