Samsung ASA07C5(6)ME, Руководство по обслуживанию, Страница: 36 / 60

Troubleshooting
5-11 Samsung Electronics
!
If the first number is , it is correct otherwise press until
appear.
@
When pressing the button ~ appear on the display,
select one of them.
# When pressing the button ~ appear on the display,
select one of them.
$ When pressing the button ~ appear on the display,
select one of them.
% When pressing the button ~ appear on the display,
select one of them.
^ When pressing the button ~ appear on the display,
select one of them.
Step 3 : Reconfirming option set after completion
(in case of ex. 020000-170351)
After pressing selector for the mode, the display shown as .
After pressing selector for the mode, the display shown as .
Step 4 : Pressing the ON/OFF button ( )
When pressing the operation ON/OFF key with the direction of remote controller for unit,
the sound “Ding” or “Diriring” is heard and the first LED lamp on the left side is flicker-
ing at the same time, then the input of option is completed. (If the diriring sound isn’t
heard, try again pressing the ON/OFF button.)
Step 5 : Unit operation test-run
First, Remove the battery from the remote controller.
Second, Re-insert the battery into the remote controller.
Third, Press ON/OFF key with the direction of remote controller for set.
• Error Mode
1 st If all lamps of indoor unit are flickering, Plug out and plug in again and pressing ON/OFF key to retry.
2 nd If the unit is not working properly or all lamps are continuously flickering after setting the option code, see if
the correct option code is set up for it’s model.
DB98-04445A(1)-1 4/9/02 11:42 AM Page 5-11