Samsung AR TXFC Series, Руководство пользователя, Страница: 18 / 50

18
Remote Control Operation
English
At a Glanc
e
At a Glanc
e
Selecting an operation mode
To change the current mode between Auto, Cool, Dry, Fan, and Heat,
press the (Mode) button.
You can use AI Auto mode after Wi-Fi is connected.
NOTE
You can use the Cool, Dry, and Heat modes in the following operation
range.
Mode Cool Dry Heat
Indoor
temperature
16 °C to 32 °C 18 °C to 32 °C 27 °C or less
Outdoor
temperature
-10 °C to 46 °C -10 °C to 46 °C −15 ℃ to 24 ℃¹⁾
Indoor
humidity
Relative
humidity of
80 % or less²⁾
_ _
¹⁾ If the outdoor temperature drops to −15 ℃, the heating capacity
may decrease by as much as 60-70 %.
²⁾ If the air conditioner operates in Cool mode in a high-humidity
environment for an extended period of time, condensation may
occur.
• For more information about outdoor temperature in the multi
system, refer to the manual for the multi system.
You can switch between Celsius and Fahrenheit indications on the
remote control.
▶ Press and hold for 3 or more seconds.
NOTE
• The temperature indications on the indoor unit are not switched.
• This function is canceled when the remote control batteries are
replaced. In this case, run this function again.
You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan
speed, and air direction.
Remote Control Operation