Samsung AR NXFS Series, Руководство по установке

Страница: 5 / 32

4 English
Installation
• Do not use the air conditioner in environments with
hazardous substances or close to equipment that
release free flames to avoid the occurrence of fires,
explosions or injuries.
• Our units must be installed in compliance with the
spaces indicated in the installation manual to ensure
either accessibility from both sides or ability to perform
routine maintenance and repairs. The units’ components
must be accessible and that can be disassembled in
conditions of complete safety either for people or things.
For this reason, where it is not observed as indicated
into the Installation Manual, the cost necessary to reach
and repair the unit (in safety, as required by current
regulations in force) with slings, trucks, scaffolding or
any other means of elevation won’t be considered in-
warranty and will be charged to end user.
• The outdoor unit shall be installed in an open space that
is always ventilated.
• The local gas regulations shall be observed.
• To handle, purge, and dispose the refrigerant, or break
into the refrigerant circuit, the worker should have a
certificate from an industry-accredited authority.
• Do not install the indoor unit in the following areas:
–
Area filled with minerals, splashed oil, or steam.
It will deteriorate plastic parts, causing failure or
leakage.
– Area that is close to heat sources.
–
Area that produces substances such as sulfuric gas,
chlorine gas, acid, and alkali. It may cause corrosion
of the pipings and brazed joints.
–
Area that can cause leakage of combustible gas
and suspension of carbon fibers, flammable dust, or
volatile flammables.
– Area where refrigerant leaks and settles.
–
Area where animals may urinate on the product.
Ammonia may be generated.
• Do not use the indoor unit for preservation of food
items, plants, equipment, and art works. This may cause
deterioration of their quality.
• Do not install the indoor unit if it has any drainage
problem.
Installation Guide at the seashore
• Make sure to follow below guides when installing at the
seashore.
1.
Do not install the product in a place where it is directly
exposed to sea water and sea breeze.
–
Make sure to install the product behind a structure
(such as building) that can block see breeze.
–
Even when it is inevitable to install the product in
seashore, make sure that product is not directly
exposed to sea breeze by installing a protection
wall.
2.
Consider that the salinity particles clinging to the
external panels should be sufficiently washed out.
3.
Because the residual water at the bottom of the outdoor
unit significantly promotes corrosion,
make sure that the slope does not disturb drainage.
–
Keep the floor level so that rain does not
accumulate.
–
Be careful not to block the drain hole due to foreign
substance
4. When product is installed in seashore, periodically clean
it with water to remove attached salinity.
5.
Make sure to install the product in a place that provides
smooth water drainage. Especially, ensure that the base
part has good drainage.
6.
If the product is damaged during the installation or
maintenance, make sure to repair it.
7. Check the condition of the product periodically.
– Check the installation site every 3 months and
perform anti-corrosion treatment such as R-Pro
supplied by SAMSUNG (Code : MOK-220SA) or
commercial water repellent grease and wax, etc.,
based on the product condition.
–
When the product is to be shut down for a long
period of time, such as off-peak hours, take
appropriate measures like covering the product.
8.
If the product installed within 500m of seashore, special
anti-corrosion treatment is required.
※ Please contact your local SAMSUNG representative for
further details.
Protection wall
Sea
Sea
Sea
Sea breeze
Sea breeze
Sea breeze
Outdoor
unit
Outdoor unit
Outdoor
unit
Outdoor
unit
Outdoor
unit
• Protection wall should be constructed with a solid
material that can block the sea breeze and the height
and width of the wall should be 1.5 times larger than the
size of the outdoor unit. (You must secure more than
700mm of space between the protection wall and the