Samsung AR MRFQ Series Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 46

Samsung AR MRFQ Series Скачать руководство пользователя страница 24

24

English

Cleaning and Maint

enanc

e

Troubleshooting

If the air conditioner operates abnormally, refer to the following
chart to save time and unnecessary expenses.

Problem

Solution

The air
conditioner does
not work at all.

•

Check the power status, then operate the air
conditioner again.

•

Switch on the circuit breaker, plug in the
power cord, then operate the air conditioner
again.

•

Make sure that the isolator is turned on.

•

Check whether the Timed off function is
running. Operate the air conditioner again by
pressing the Power button.

I cannot change
the temperature.

•

Check whether the Fan or Fast mode is
running. In these modes, the air conditioner
controls the set temperature automatically,
and you cannot change the set temperature.

Cool air does not
come out of the
air conditioner.

•

Check whether the set temperature is
higher in the Cool mode than the current
temperature. Press the Temperature button
on the remote control to change the set
temperature.

•

Check whether the air filter is blocked with
dirt. If the air filter is blocked, the cooling
performance may decrease. Remove dirt
regularly.

•

Check whether the outdoor unit is covered
or installed near obstacles. Remove the
coverings and obstacles.

RAC MEDIA ODM 아프리카향 IBIM_EN_DB68-00000A-00.indb 24

2017-01-20 오전 11:28:33

«
...
22
23
24
25
26
...
»

Содержание AR MRFQ Series















































Отзывы:

Нет отзывов