Samsung AR KPFH Series Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 52

Samsung AR KPFH Series Скачать руководство пользователя страница 24

English-24

Cleaning the air conditioner

Cleaning the indoor unit

Cleaning the outdoor unit heat exchanger



When dust accumulates on the heat exchanger, it may decrease cooling

performance. Therefore, clean it regularly.



Spray water to clean the dust.

• If it is difficult to clean the outdoor unit heat exchanger on

your own, contact service center.

Heat exchanger

(Illustration may differ slightly

depending on the models)

•

Make sure to turn off the power of the indoor unit and cut-off

the power supply before cleaning the air conditioner.

CAUTION

• Do not clean the display using alkaline detergent.

• Do not use sulfuric acid, hydrochloric acid, organic solvents

(such as thinner, kerosene and acetone etc.) to clean the

surface of the product or put any stickers on it.

They may damage the surface of the air conditioner.

CAUTION

• Be careful with the sharp edges on the

outdoor unit heat exchanger.

CAUTION



Clean the product with a tepid damp cloth.



Remove the dust accumulated in the gap of the product with a soft
brush .

• Contact the service center when you clean the indoor unit

heat exchanger because it needs to be disassembled.

Opening the panel

Tightly grab bottom of grill panel and pull up.

Then slightly lift the panel up.

RC_BORACAY_IB&IM_EN_DB68-05679A-00.indd 24

2/1/2016 2:18:58 PM

«
...
22
23
24
25
26
...
»

Содержание AR KPFH Series





















































Отзывы:

Нет отзывов