Samsung AQV09N Series, Руководство по установке, Страница: 5 / 21

E-
4
CAuTIoN

This indicates the possibility of serious injury or damage to environments when
operated incorrectly .
 Check the unit for damage
that may have taken place
during transportation and do
not install or use damaged
equipment .

All of the manufacturing and
packaging material used for
your new appliance are
compatible with the
environment and can be
recycled .
 Dispose of the packaging
material in accordance with
the local requirements .

This product is an air
conditioning system and
contains a coolant that must
be recovered and disposed
of in an appropriate way by
qualified personnel . At the
end of the life cycle, take it to
a proper recycling or disposal
center or return it to the
dealer so that it can be
disposed correctly .
 Grounding the unit .
Do not connect the ground
to a gas pipe, water pipe,
lightning rod or telephone
grounding . Defective
grounding could cause
electric shock .

Do not install the unit in a
place where it is exposed to
inflammable gas leakage .
There is a risk of explosion .
 Install a ground leakage
breaker depending on the
installation place (where it is
humid) . If not, it may cause
electric shock .

Perform the drainage/piping
work securely according to
the installation manual .
If not, water could drop from
the unit and household
goods could get wet and
damaged .
 Fasten a flare nut with a
torque wrench as specified
in this installation manual .
When fastened too tight,
a flare nut may break after
a long period of time and
cause refrigerant leakage .

To prevent injury when
accidentally touching the
indoor unit fan, install the
indoor unit on a place higher
than 8 .ft ( .5m) .
 The air conditioner must be
installed according to the
national electrical
regulations .

The maximum input power &
current is measured
according to the IEC standard
and the input power &
current is measured
according to the ISO
standard .
WARNING
 This indicates the possibility of serious injury or death .

The unit should be installed in
accordance with the National
Electrical regulations .

Ensure that the national safety
code requirements have been
followed for the main supply
circuit . Ensure that a properly
sized and connected ground
wire is in place .

Check if the voltage and the
frequency of the main power
supply are those required for
the unit to be installed and
check the connection .

Make sure that properly sized
disconnecting and safety
switches are installed .

Do not attempt to repair,
move, modify or reinstall
the unit on your own . Make
sure that these installations
are carried out by qualified
personnel to avoid electric
shock or fire .

Use the unit on a single outlet
circuit . Do not share the power
outlet with other appliances .
Obtain the consent by a
qualified installer before
connecting the unit to the
power supply system .