Samsung AQV09K Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 45

Samsung AQV09K Series Скачать руководство пользователя страница 20

20

Cleaning the air conditioner

Cleaning the Full HD fi lter

Washable foam based Full HD fi lter captures large particles from the air. The fi lter is cleaned with a vacuum or by hand washing.

Open the panel and put the Full HD filter out.

Insert the Full HD filter back in its original

position and close the front panel.

Dry the Full HD filter in a ventilated area.

Clean the Full HD filter with a vacuum cleaner or soft

brush. If dust is too heavy, rinse it with running water.

• Clean the Full HD fi lter every 2 weeks. Cleaning term may diff er depending on the usage and environmental

conditions. In dusty area, clean it once a week.

• If the Full HD fi lter dries in a confi ned (or humid) area, odors may generate. If it occurs, re-clean and dry it in a

well-ventilated area.

Removing the Full HD fi lter

Grab the handle and lift it up. Then, pull the Full HD fi lter towards

you and slide it down.

Full HD fi lter

AQV09K&Y@@_Jungfrau_IBIM_E_32448A.indd 20

2011-3-19 15:45:14

«
...
18
19
20
21
22
...
»

Содержание AQV09K Series














































Отзывы:

Нет отзывов