Heating Your Room
E-
10
You must select the Heat mode if you wish to adjust the :
◆
Heating temperature
◆
Fan speed when heating
1
If necessary, press the (On/Off) button.
Result:
◆
The power indicator on the control panel comes on.
◆
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆
Switched on
◆
Stopped
lt will start up normally after three minutes.
IM
PORTANT
If the is not displayed on the control panel, press the
button on the
remote control one or more times until it appears.
Result:
◆
The indoor unit beeps each time you press the
button.
◆
The air conditioner runs in the Heat mode.
2
You can change modes at any time.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
You can't control the airflow direction when the fan doesn't operate.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
To adjust the temperature, press the buttons on the remote control or
buttons on the control panel one or more times until the required temperature is
displayed. Possible temperatures are between 16
O
C and 30
O
C inclusive.
Result:
◆
Each time you press the buttons:
- The temperature is adjusted by 1
O
C.
- The indoor unit beeps.
◆
The air conditioner starts heating, provided that the room
temperature is lower than the selected temperature.
◆
For the first 3~5 minutes, the fan may not operate to prevent
the cool air from running out of the indoor unit.
◆
If the room temperature reachs the set temperature, the air
conditioner stops heating, but the fan is still operating.
◆
The Defrost indicator( ) appears when frost forms on the outdoor
unit and disappears automatically after removing frost.
3
Select the fan speed by pressing the
button on the remote control
or button one or more times until the required setting is displayed :
Result:
◆
Each time you press the
button, the indoor unit beeps.
Automatic(rotated :
➔
➔
)
Low
High
4
To control the direction of the air flow, refer to page 16.
5
C
C
C
