3-4
Samsung Electronics
3-2 Installation
3-2-1 Selection of Installation Place
3-2-1(a) Indoor Unit
3-2-1(b) Outdoor Unit
* If there is any unavoidable reason to install the unit at such
a place, take the following measures against the wind;
1. When installing the unit at a roadside concentrated with
buildings, install it parallel with the ro a d .
2. Install the unit so that the air outlet faces toward the wall
at a place such as rooftop, which may be subjected to
s t rong wind.
* The outdoor unit should be installed in accordance with the service space.
• Place free from the risk of combustible gas leakage.
• Place which can bear the weight of the unit.
• Place which can bear the fixing strength of the outdoor unit.
• Avoid a place subject to oil (including machine oil).
• Avoid a saline place.
• Avoid a place subject to sulfide gas (hot spring zone).
(When installing the unit at such special environmental
conditions, it may cause machine trouble. When it is
unavoidable to use such places. It re q u i res special
m a i n t e n a n c e . )
• A place where the discharge air and noise of the outdoor unit do not disturb the neighborh o o d .
(Take special care not to cause any inconvenience to your neighbors when installing the unit on
the borderline with your neighborh o o d . )
• A place where strong wind does not head against the air outlet of the outdoor unit.
(If a strong wind heads directly against the air outlet at the time of cool operation, a safety device
can be operated.)
• Do not install the outdoor unit at an unstable place such as outer wall of an apartment or build-
ing.
The outdoor unit may fall down, causing severe personal or property damage or loss.
• Install the unit at a place close to the wall facing the outside
as it is necessary to perform piping connection with the out-
door unit.
- It is effective to install the unit at a window side to ensure
uniform distribution of indoor temperature .
• Install the unit at a place where there is no obstacle against
the wind around the air inlet and air outlet.
• Install the unit horizontally at a stable, rigid place.
(When installing the unit at a place subjected to vibration,
noise may occur. )
• Avoid a place near the door which is frequented by people.
• Avoid a place subject to direct sunlight.
Above 15cm
Above 15cm
Above 50cm
Above 15cm
Above 50cm
Above 30cm
The air inlet faces toward the wall.
The air outlet faces toward the wall.
Space for piping
and wiring
Space for piping
and wiring
Wall
Strong wind
Roof top
Above 50cm
Above 100cm
Above 20cm
Top view
Side view
Содержание AP500PF
