Samsung AM072/096/120/144FXVAFH, Руководство по обслуживанию

Страница: 277 / 295

8-14 Samsung Electronics
K3 (Number of press) KEY operation Display on segment
1 time Intialize (Reset) setting Same as initial state
K4
(Number of press)
KEY operation
Display on segment
SEG 1 SEG2, 3, 4
1 time Outdoor unit model 1 AM120FXW
6 →
Off, 1, 2
2 times Target frequency (Compressor 1) 2 120 Hz → 1, 2, 0
3 times Target frequency (Compressor 2) 3 120 Hz → 1, 2, 0
4 times High pressure (MPa) 4 1.52 MPa → 1, 5, 2
5 times Low pressure (MPa) 5 0.43 MPa
→
0, 4, 3
6 times Discharge temperature (Compressor 6 87 °C
→
0, 8, 7
7 times Discharge temperature (Compressor 7 87 °C → 0, 8, 7
8 times IPM temperature (Compressor 1) 8 87 °C → 0, 8, 7
9 times IPM temperature (Compressor 2) 9 87 °C → 0, 8, 7
10 times CT sensor value (Compressor 1) A 2 A
→
0, 2, 0
11 times CT sensor value (Compressor 2) B 2 A
→
0, 2, 0
12 times Suction temperature C -42 °C → -, 4, 2
13 times COND OUT temperautre D -42 °C → -, 4, 2
14 times Temperature of liquid pipe E -42 °C → -, 4, 2
15 times TOP temperature (Compressor 1) F -42 °C
→
-, 4, 2
16 times TOP temperature (Compressor 2) G -42 °C
→
-, 4, 2
17 times Water temperature H -42 °C → -, 4, 2
18 times EVI inlet temperature I -42 °C → -, 4, 2
19 times EVI outlet temperature J -42 °C → -, 4, 2
20 times Main EEV 1 step K 2000 steps
→
2, 0, 0
21 times Main EEV2 step L 2000 steps
→
2, 0, 0
22 times EVI EEV step M 300 steps → 3, 0, 0
23 times HR EEV step N 2000 steps → 2, 0, 0
24 times - O -
25 times Current frequency of the compressor P 120 Hz
→
1,2,0
26 times Current frequency of the compressor Q 120 Hz → 1,2,0
27 times Suction 2 temperature R -42 °C → -, 4, 2
28 times Address of master indoor unit S
When master indoor unit is not set → BLANK, N, D
When indoor unit No.1 is set as master indoor unit
→
0, 0, 1
29 times Temperature of control box T -42 °C → -, 4, 2
㽞 ͑
AM072/096/120/192HXWA
66
ఐ
When you install the product, optional function for outdoor unit must be set in compliance with installation conditions.
ఐ
SW version, View mode 2 and address of the indoor unit, press and hold for three seconds to enter the K4.
(Information will be displayed in following order. Main-Hub-INV1-INV2 FAN1-FAN2-EEP-Automatically assigned address -
manually assigned address.)
View mode 2
K4
(Number of press)
KEY operation KEY operation
Display on Page
Page 1 Page 2
1
TIME Main version Main version Main Version(ex. 1412)
2
TIMES HUB version HUB version HUB Version(ex. 1412)
3
TIMES Water HUB version Water HUB version HUB2 Version(ex. 1412)
4
TIMES Inverter1 version Inverter1 version INV1 Version(ex. 1412)
5
TIMES Inverter2 version Inverter2 version INV2 Version(ex. 1412)
6
TIMES EEPROM version EEPROM version EEPROM Version(ex. 1412)
7
TIMES
The device receives
automatic address
The device receives
automatic address
AUTO
SEG1,2 SEG3,4
Indoor unit : "A","0"
MCU : "C","1"
Adress(ex. 07)
8
TIMES
The device receives
a manual address
The device receives
a manual address
MANU
SEG1,2 SEG3,4
Indoor unit : "A","0" Adress(ex. 15)
How to check the view mode using a tact switch
(cont.)