29
English
Appendix
Troubleshooting
Refer to the following chart if the air conditioner operates abnormally. This
may save time and unnecessary expenses.
Appendix
Problem
Solution
The air
conditioner does
not operate
immediately
after it has been
restarted.
• Because of the protective mechanism, the
appliance does not start operating immediately to
keep the unit from overloading.
The air conditioner will start in 3 minutes.
The air
conditioner does
not work at all.
• Check that the power plug is properly connected.
Insert the power plug into the wall socket correctly.
• Check if the circuit breaker is switched off.
• Check if there is a power failure.
• Check your fuse. Make sure it is not blown out.
The temperature
does not change.
• Check if you selected Fan mode.
Press the button on the remote control to select
another mode.
The cool (or warm)
air does not come
out of the air
conditioner.
• Check if the set temperature is higher (lower)
than the current temperature. Press the or
button on the remote control to change the
set temperature. Press the Temperature or
button to increase or decrease the temperature.
• Check if the air filter is blocked by dirt. Clean the air
filter every two weeks.
• Check if the air conditioner has just been turned on.
If so, wait for 3 minutes.
The fan speed
does not change.
• Check if you selected Auto or Dry mode.
The air conditioner automatically adjusts the fan
speed to Auto in Auto/Dry mode.
