Samsung AM***KNQD** Скачать руководство пользователя страница 22

22

English

A

dv
anc
ed Oper

ation

For a comfortable sleep, the air conditioner will operate in order of ‘Fall asleep 

► 

Sound sleep 

► 

Wake up’ stages. 

Using the good’sleep Function

• 

Fall asleep mode: Provides you with comfortable environment for a good sleep by rapid 
cooling and hypnagogue expedition breeze.

• 

Sound sleep mode: The sound sleep mode adjusts temperature and air flow in waves to 
maintain healthy skin temperature while it aids deep sleep. According to the change of good’ 
sleep operation hours, the sound sleep hour can increase or decrease.

• 

Wake up from good’sleep mode: Provides you with the air flow that adjusts your body 
temperature to wake you up in a fresh status.

  NOTE

• 

In good'sleep mode, the air conditioner will operate in Cool + (   ) mode for first 30 minutes. 
The fan speed and air flow direction will be adjusted automatically in good'sleep mode.

• 

Recommended set temperature is between 25 °C (77 °F) and 27 °C (81 °F) and the value 26 °C 
(79 °F) is the most ideal temperature.

• 

If the set temperature is too low, you may feel cold while sleeping or catch a cold.

• 

Optimal operation time in good'sleep mode is 8 hours. Therefore, if the time is set too short 
or long, you may not feel as comfortable as you want.

• 

If the good'sleep mode is set over 5 hours, The Wake up stage will begin when 1 hour is 
remaining in the operation time and the air conditioner will stop automatically.

• 

When the On timer and the good'sleep mode are set simultaneously, the air conditioner will 
only apply the function that was set later.

• 

While the good'sleep mode is operating, the   mode can be set additionally by pressing the 

 button.

• 

If you press the 

 button and select the Turbo/Quiet function, the good'sleep mode will be 

cancelled and the selected mode will begin operation.

• 

If you press the 

 button, the good'sleep mode will be cancelled and the selected mode will 

begin operation.

DVM_BORACAY_IB_DB68-06415A-00_EN.indb   22

2016-08-31   오후 2:13:23

Содержание AM***KNQD**





















































Отзывы: