Samsung AM AN1PCH Series, Руководство по установке

Страница: 33 / 48

33
English
Installation Pr
oc
edur
e
Installation options for the 02 series
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 2 Evaporator Drying
Use of external
room temperature
sensor / Minimizing
fan operation when
thermostat is off
Use of central
control
FAN RPM
compensation
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1 - - -
EEV Step when
heating stops
Dew removal
operation in
WindFree mode
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2
Use of external
control
Setting the output
of external control
/ External heater
signal / Cooling
operation signal /
Free Cooling control
signal
- Buzzer control Hours of filter usage
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3
Individual control of
a remote controller
Heating setting
compensation
/ Removing
condensate water in
heating mode
Adjusted EEV step of
stopped unit during
oil return /defrost
mode.
Motion detect sensor -
• If you set the Maximum filter usage time (SEG18) option to a value other than 2 and 6, it is automatically set to 2
(1000 hours).
• If you set an option to a value that is out of range specified above, the option is automatically set to 0 by default.
• The SEG5 option (Use of central control) is set to 1 (Use) by default. Therefore, you don't need to set the SEG5 option
additionally. Note that even if the central control system is not connected, no errors occur. If you want a specific
indoor unit not to be controlled by the central control system, set the SEG option of that indoor unit to 0 (Disuse).
• The external output of SEG15 is generated via MIM-B14 connection. (Refer to the manual of MIM-B14.)
• If you set the Individual control with remote control (SEG20) option to a value other than 0 to 4, it is automatically set
to 0 (Indoor 1).
Outdoor
Communication
(+) (-) COM2
DC 12 V Wire Remote
Controller
AC
POWER
L N COM1
* The output of hot coil terminal is AC 220 V / 230 V
(The same as Indoor Unit’s input Power)
ki]_TXXXW^hTWX†pt†k}tG~•‹Gm™ŒŒGXžˆ †hh†lu†U•‹‹GGGZZ YWYXTXWTYWGGG㝘㤸GXXa[_a\\