Samsung AJ RBADEC Series, Руководство пользователя и инструкция по установке

Страница: 35 / 52

34
Cleaning and Maint
enanc
e
• If a Samsung account-related country error
occurs during connecting to your product, log
out of your current Samsung account, log in to
your previous Samsung account, and then delete
all devices that have been connected previously.
Then, log in to your current Samsung account
again, and then configure the settings.
• If a failure message appears while adding a
device, see "Setting up and connecting to a Wi-Fi
access point using your smartphone" on page 32.
The connection may fail temporarily due to an
installation location problem of the access point
or other problems.
• If a message appears on the SmartThings app,
follow its instructions.
NOTE
• For the authentication/encryption protocols for
wireless/wired access points, WPA/TKIP and WPA2/
AES are recommended. New Wi-Fi authentication
specifications and non-standard Wi-Fi authentication
protocols are not supported.
• The product supports the IEEE802.11 b/g/n
(2.4 GHz), Soft-AP communication protocol.
(Samsung recommends IEEE802.11n.)
• If your Internet service provider permanently
have registered the MAC address (a unique
identification number) of your PC or modem, you
may not be able to connect your product to the
Internet. Contact your Internet service provider
and ask how to connect devices other than your
PC (such as an air conditioner and an air purifier)
to the Internet.
WARNING
• RF exposure warning statement – for keeping
20cm distance when installing this module.
• Warning that this module should not be installed
and operating simultaneously with other radio
without additional evaluation or FCC filing.
• Instruction for host system labeling, the host
system should have proper label showing that it
"Contains FCC ID : A3LSWL-B70F"
• Your device uses non-harmonised frequency
and is intended for use in all European countries.
The WLAN can be operated in the EU without
restriction indoors, but cannot be operated
outdoors in France.
Open Source Announcement
The software included in this product contains open
source software. You may obtain the complete
corresponding source code for a period of three years
after the last shipment of this product by sending an
email to mailto:oss.request@samsung.com.
It is also possible to obtain the complete
corresponding source code in a physical medium
such as a CD-ROM; a minimal charge will be required.
The following URL http://opensource.samsung.com/
opensource/SMART_AT_051/seq/0 leads to the
download page of the source code made available
and open source license information as related to
this product. This offer is valid to anyone in receipt of
this information.