Samsung AG026TN1DKH/EU, Руководство по установке

Страница: 14 / 44

14
Installation Procedure
English
Installation Pr
oc
edur
e
– Uncooled corridors and passages
– Old buildings with insufficient insulation
– Common urban buildings (apartments, houses,
classrooms, private educational institutes, offices,
general shops, etc.)
– Open structures without ceiling tex
– Structures without ventilation systems, although its
has ceiling tex
– Structures where the piping is embedded in the
wall and no external air flows into it
࣑ࠟ
*
When installing the piping in locations and
environments that meet the following conditions, use
the same insulation for the high humidity condition.
• Geographical conditions
– High humidity areas such as coastal areas, hot
springs, areas adjacent to a lake or river, ridges
where part of the building is covered with soil
– Areas where morning dew occurs frequently
(once every three days)
• Usage conditions
– Dining rooms, saunas, swimming pools,
restaurants etc.
• Building structure conditions
– When installing the piping inside a ceiling where
there is a lot of water inflow and cannot be
cooled(locations near a corridor and entrance of
a dormitory or an efficiency apartment)
– Locations with a high humidity due to poor
ventilation in the piping installation space
– Semi-basement rooms
NOTE
• If you are unclear about which insulation you should
choose, choose the one for the high humidity
condition.
• If the use of the room is expected to be changed,
reconsider the insulation thickness.
• Be sure to use only the specified insulation materials.
b Insulate the piping.
• Incorrect piping insulation may cause
condensation on the piping surfaces or degrade
the product performance.
• Make sure that the bent parts of the piping are
correctly covered with insulation.
Insulation
Insulation
Fan coil unit
Fix firmly so that there is no gap.
Be sure to overlap the insulation.
Pipe
Pipe
Clamp
Insulation
Short piping system
• You can use joined insulation (joining the pipes
and insulating them together), but avoid excessive
pressing.
• When joined insulation is used, apply the insulation
thickness one step higher.
Insulation
Water pipe