Using the remote controller
Point the remote controller towards the remote controller receiver of the indoor unit (see page 16 to fi nd the location of
remote controller receiver).
When you properly press the button on the remote controller, you will hear ring sound from the indoor unit.
• The signal may not be received well of electronic lighting style fl uorescent lamps such as inverter fl uorescent
lamps are in the same space.
• If other electrical products operate by the remote controller, call your nearest contact center.
NOTE
Battery changing time
When the battery is exhausted,( )will be displayed in the remote controller display. When the icon appears, change the
batteries. The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for a long time, remove the batteries from the remote
controller and store it in the remote controller holder.
Inserting the batteries
1. Open the battery cover.
f
f
Push the (
) part in the direction of the arrow and lift up the cover.
2. Insert the batteries.
f
f
Check and match the (+), (-) signs and insert them in correct position.
3. Close the battery cover.
f
f
Match the cover and bottom part of the remote controller and press it until you hear click
sound.
• Make sure that water is not allowed to enter the remote controller.
CAUTION
• There is a possibility that the air conditioner will not operate by remote controller near strong light such as a
fl uorescent lamp or neon sign. In this case, use the remote controller in front of the remote controller receiver
of the indoor unit.
• If other electrical products are operated by the remote controller, call your nearest service center.
NOTE
ENGLISH-19
01
PREP
AR
ATION
PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 19
2016-08-08 오전 11:38:22