background image

ENGLISH-31

02

 INST

ALLA

TION

3.  To prevent a gas leak, remove all burrs at the cut edge of the pipe with a reamer. 

•  Face the pipe down while removing the burrs to make sure that 

burrs do not get in to the pipe.

CAUTION

Pipe cutter

Pipe

Burr

4.  Put a flare nut slightly into the pipe and modify the flare.

90°± 2°

45°±2°

R 0.4 
~0.8

Pipe

Flare

Outer diameter 

[D(mm)]

Depth [A (mm)]

Flaring Size [B (mm)]

ø 6.35

1.3

8.7~9.1

ø 9.52

1.8

12.8~13.2

ø 12.70

2.0

16.2~16.6

ø 15.88

2.2

19.3~19.7

ø19.05

2.2

23.6~24.0

5.  Check that you flared the pipe correctly.

 - Below figures shows some examples of incorrectly flared pipes. 

Correct

Inclined

Damaged 

surface

Cracked

Uneven 

thickness

6.  Align the pipes to connect them easily. Tighten the flare nuts first with your hands, and then with a torque wrench, 

applying the following torque:

Indoor outlet pipe

Connecting pipe

Flare nut

Apply frozen oil

Outer diameter [mm(inch)]

Torque (N•m)

ø 6.35 (1/4")

14~18

ø 9.52 (3/8")

34~42

ø 12.70 (1/2")

49~61

ø 15.88 (5/8")

68~82

ø19.05 (3/4")

100~120

•  Excessive torque can be cause of gas leakage.

NOTE

•  You must purge with oxygen free nitrogen while brazing.

CAUTION

Содержание AE RXEDEG Series





















































Отзывы: