Heating Your Room
You must select the Heat mode if you wish to adjust the:
◆
Heating temperature
◆
Fan speed when heating
1
If necessary, press the (On/Off) button.
Result:
◆
The OPERATION indicator on the indoor unit comes on.
◆
The air conditioner starts up in the mode selected when
the unit was last used.
◆
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
◆
Plugged in
◆
Stopped
It will start up normally after a three-minute.
2
If the indication is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result:
◆
The indoor unit beeps each time you press .
◆
The air conditioner starts up in Heat mode.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
You can change modes at any time.
3
To adjust the temperature, press the or
buttons one or more
times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
◆
Each time you press or
:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆
The air conditioner starts heating, provided that the room
temperature is lower than the desired temperature
(selected temp3°C); the fan will, however, operate.
4
Select the fan speed by pressing the button one or more times
until the required setting is displayed:
Low
Medium
High
Automatic
Result:
◆
Each time you press , the indoor unit beeps.
◆
For the first three to five minutes, the fan operates very
slowly until the air has been sufficiently warmed. Once the
correct temperature has been reached, the fan is
automatically set to the required speed.
5
To control the direction of the air flow, refer to page 15.
E-
11
IMPORTANT
IM
MODE
MODE
MODE TURBO OFF
MODE TURBO OFF
MODE TURBO OFF
ENGLISH
