manualshive.com logo in svg

Samsung AC052MNCDKH, Руководство по обслуживанию, Страница: 74 / 87

Поделиться
Скачать
Samsung AC052MNCDKH Скачать руководство пользователя страница 74

4-40

Samsung Electronics

1. E465 : Compressor over load error
    • If a compressor works improperly, change the compressor and check if it works properly.
    

→

 If a compressor is normal, check the assembly between Heatsink-Inverter PBA. If it is fine, change Inverter PBA.

2. E468 : Current sensor error
    • Check EEPROM data. 
    • Check PCB operates properly.

3. E471 : Oudoor EEPROM error
    • Upload EEPROM on Outdoor unit Main PBA.

4. E474 : IPM(IGBT Module) or PFCM Temperature sensor Error
    • E500 : IPM is over heated
    • Check IPM is well assembled to heatsink
    • Check whether inlet port is clogged.
    • Change IPM if it is defective one

5. E554 : Gas leak error
    • Check refrigerant charge
    • Check Indoor EVA sensor
    • Check Service valve is open.
    • Check the pipes and wires correctly connected.

6. E556 : Capacity miss match between indoor and outdoor
    • Check the model name of indoor and outdoor unit and set option code on indoor unit again.

7. Outdoor overload protection control (at the stop of the compressor.) :  E404 
    • Check whether the fan and the motor operate normally.
    • Check the operation of EEV.
    • Check the temperature sensor of the indoor unit heat exchanger.
    • Check the indoor unit inlet blocking.

4-4-23 The others

Содержание AC052MNCDKH
























































































Отзывы:

Нет отзывов