16
English
A
t a Glanc
e
Inserting the batteries
1. Open the battery cover of the remote controller.
- Press the (
) part gently and lift it up in the arrow direction.
2. Insert the batteries.
- Check and match the (+)and (-) signs accordingly.
3. Close the battery cover.
- Match the cover and bottom part of the remote controller and press it
until you hear click sound.
CAUTION
•
Make sure that water is not allowed to enter the remote controller.
•
There is a possibility that the air conditioner will not operate by remote controller
near strong light such as a fluorescent lamp or neon sign. In this case, use the remote
controller in front of the remote controller receiver of the indoor unit.
• If other electrical products are operated by the remote controller, call your nearest
service center.
• Filter reset
: When the filter reset indicator is turned on the indoor unit display, clean
the filter and press the
Settings
<
,
>
or
Settings
(Filter Reset) blinking
SET
button.
• Beep off
: To silence the beep sound, press the
Settings
<
,
>
or
Settings
(Beep) blinking
SET
button. If you press the
Settings
<, >
or
Settings
(Beep) blinking
SET
button again, the beep sound will ring again.
NOTE
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product
should not be disposed of with other household waste at the end of their working life. Where
marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66.
Remote Control Overview
