Samsung AC009KNLDCH, Руководство по обслуживанию, Страница: 34 / 64

4-10 Samsung Electronics
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
RESERVED
Use of external
temperature
sensor
Use of central
control
RESERVED
Indication and
Details
Indication Details Indication Details Indication Details Indication Details
0 2
0 Disuse 0 Disuse
1 Use 1 Use
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE Use of drain pump Use of Hot Coil
RESERVED RESERVED RESERVED
Indication and
Details
Indication Details Indication Details Indication Details
1
0 Disuse 0 Disuse
1 Use 1 Use
2
Use +
3minute
delay
- -
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation PAGE
Use of external
control
Setting the output of
external control
S-Plasma ion Buzzer control
Number of hours
using filter
Indication and
Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
2
0 Disuse 0 Thermo on 0 Disuse 0
Use of
buzzer
2 1000 Hour
1
ON/OFF
Control
1 Operation on
1
Use 1
Non use
of buzzer
6 2000 Hour
2
OFF
Control
3
WINDOW
ON/OFF
Control
Option SEG19 SEG20 SEG21 SEG22 SEG23 -
Explanation PAGE
control of a remote
controller
Heating setting
compensation
RESERVED
Away Set OFF
Timer
-
Indication and
Details
Indication Details Indication Details Indication Details Indication Details -
3
0 or 1 Indoor 1 0 Disuse 0 or 1
Auto
Set OFF
30Min.
-
2 Indoor 2 1 2°C 2
Auto
Set OFF
60Min.
3 Indoor 3
2 5°C
3
Auto
Set OFF
120Min.
4 Indoor 4 4
Auto
Set OFF
180Min.
S-PI function :If SEG16 is set to 1,S-PI will be used.but when the air conditioner is turned off there's no S-PI function even if SEG 16 is "1"
5. Press the
button to save and complete the option setting.
6. Press the button to exit to normal mode.
t Press button anytime during setup to exit without setting.
t
Option code will not be applied if you don't press button.
t Setting Installation option code is available only with a master wired remote controller.
t
Setting Installation option code is available when there is one on one connection between a wired remote controller and an indoor
unit.
NOTE