Samsung AC TXAD C Series, Руководство по установке, Страница: 16 / 32

16
Installation Procedure
English
Installation Pr
oc
edur
e
3 Insert both sides of core wire of the power cable into
the connection sleeve.
•
Method 1 : Push the core wire into the sleeve from
both sides.
• Method 2 : Twist the wire cores together and push it
into the sleeve.
Method 1
Connection sleeve Connection sleeve
Method 2
CAUTION
• If cable wires are connected without using connecting
sleeves, their contact area becomes reduced, or
corrosion develops on the outer surfaces of the wires
(copper wires) over a long time. This may cause an
increase of resistance (reduction of passing current)
and consequently may result in a fire.
4 Using a crimping tool, compress the two points and
Ѥ̈Χ̈ϩͱЭʪθɇ͝ʒʀͱ͔Χθʪϑϑɇ͝ͱϩ˵ʪθϩиͱΧͱ̈͝ϩϑ̈͝ϩ˵ʪ
same location.
• The compression dimension should be 8.0.
Compression
dimension
• After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
Method 1 Method 2
5 mm
Compress it 4 times. Compress it 4 times.
5 mm
5 Wrap it with the insulation tape twice or more and
position your contraction tube in the middle of the
insulation tape.
Method 1 Method 2
40 mm
Insulation tape Insulation tape
35 mm
6 Apply heat to the contraction tube to contract it.
Method 1
Contraction tube Contraction tube
Method 2
7 After tube contraction work is completed, wrap it with
ϩ˵ʪ̈͝ϑЇ̷ɇϩ̈ͱ͝ϩɇΧʪϩͱѣ̈͝ϑ˵࢏
Three or more layers of insulation are required.
Method 1
IInsulation tape
IInsulation tape
Method 2
CAUTION
• Make sure that the connection parts are not exposed
to outside.
• Be sure to use insulation tape and a contraction tube
made of approved reinforced insulating materials
that have the same level of withstand voltage with
the power cable. (Comply with the local regulations on
extensions.)
WARNING
• In case of extending the electric wire, please DO NOT
use a round-shaped Pressing socket.
– Incomplete wire connections can cause electric
shock or a fire.