7
Digital display and Control panel
Exchange
Auto
Dust
Sleep
Deodo
High
Turbo
Mid
Low
Odor
Mode
Speed
Dust
Filter Reset
Filter Reset button
Power button
Air contamination
level display
FAN speed display
FAN speed button
Operation mode button
Operation mode display
Exchange lamp
Filter Reset button
Press the
button for 2 seconds to clear and reset the Filter Exchange reminder.
When filters are needed to be replaced, the Exchange indicator will be lit up.
Mode button
The air purifier runs in 4 operation modes: Auto, Dust, Sleep and Deodo.
FAN speed button
The
button controls how much air flows through the air purifier.
Pressing the
button changes the fan speed : Low, Mid, High and Turbo.
Power button
Press
button to turn the air purifier on and off.
Air contamination level
• Air contamination level indicates the air contamination state detected by the odor and
dust sensors.
• The lower the light, the lower the concentration of contamination and the more the light,
the more concentration of contamination of indoor air.
• After turning on the air purifier, the contamination level will be displayed up and down
for initial 2 minutes since the sensor is detecting indoor air contamination level.
• The air contamination level doesn’t go below two light bars.
NOTE
AC-S38ANBA Series_EN_33956A(4).indd 7
2013-07-08 오후 6:05:37
