Samsung AC NN4SEC Series, Руководство пользователя и инструкция по установке, Страница: 35 / 40

ENGLISH
35 English
assign option codes except SEG 1, 7 which are page options.
Setting an indoor unit installation option (suitable for the condition of each installation location)
1. Make sure power is ON to the outdoor unit.
2. The panel display should be connected to the indoor unit to receive option settings.
3. Set the installation option according to the installation requirements of the air conditioner.
f
The default indoor unit installation option setting is “020000-100000-200000-300000”.
f
Wireless remote controller address (SEG20) allows control of an indoor unit individually when there is more
than one indoor unit in a space. This prevents unwanted overlapping of cotroller signal to different units.
f
No need to assign SEG3, 6, 8, 9, 10, 11, 16, 21, 22, 23, 24 which are non applicable. Even if these segments
are set, they will be ignored.
f
If you set the applicable segments with numbers other than the indiciated, the initial setting will be maintained.
4. Set the indoor unit option by wireless or wired remote controller.
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
RESERVED
Use of external
temperature sensor Use of central control
RPM setting
compensation
Setting/
Details
Indication Details Indication Details Indication Details Indication Details
0. Not used
1. High ceiling mode
2. High ceiling kit
0 2
0 Disuse 0 Disuse
1 Use 1 Use
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE Use of drain pump*
RESERVED RESERVED RESERVED RESERVED
Setting/
Details
Indication Details Indication Details
1
0 Disuse
1 Use
2
Use +
3minute
delay
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation PAGE
Use of external
control
Setting the output of
external control
S-Plasma ion* Buzzer control
Number of hours
using filter
Setting/
Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
2
0 Disuse 0 Thermo on 0 Disuse 0
Use of
buzzer
2 1000 Hour
1
ON/OFF
Control
1
Operation
on
1 Use 1
Non use of
buzzer
6
2000
Hour
2
OFF
Control