3
Storing Channels Automatically
No sound or picture
Check that the mains lead has been connected to a wall socket.
•
Check that you have pressed the button on your set.
•
Check the picture contrast and brightness settings.
•
Check the volume.
•
Check if
•
Select Speaker
is set to
External Speaker
.
Normal picture but no sound
Check the volume.
•
Check whether the
•
M
MUTE
button has been pressed on the remote control.
No picture or black and white
picture
Adjust the colour settings.
•
Check that the broadcast system selected is correct.
•
Sound and picture
interference
Try to identify the electrical appliance that is affecting the television, then move it further away.
•
Plug the television into a different main socket.
•
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
•
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
•
Clean the upper edge of the remote control (transmission window).
•
Check that the
•
+
and
–
ends of the batteries are inserted correctly.
Check that the batteries are drained.
•
Screen is black and power
indicator light blinks steadily
On your computer check; Power, Signal Cable.
•
Move the computer’s mouse or press any key on the keyboard.
•
On your equipment check (STB, DVD, etc) ; Power, Signal Cable.
•
The TV is using its power management system.
•
Press the Source button on the panel or remote control.
•
Turn the TV off and on.
•
The damaged picture appears
in the corner of the screen.
If
•
Screen Fit
is selected in some external devices, the damaged picture may appear in the
corner of the screen. This symptom is caused by external devices, not TV.
The “Resets all settings to
the default values” message
appears.
This appears when you press and hold the
•
EXIT
button for a while. The product settings are
reset to the factory defaults.
Troubleshooting
Scans for all channels with active broadcast stations (and availability depends on your
country) and stores them in the TV’s memory.
You can memorize the Antenna source.
Air
•
:
Air
antenna signal.
Cable
•
:
Cable
antenna signal.
Air+Cable
•
:
Air
and
Cable
antenna signals
If the antenna is connected to ANT 2 IN (CABLE), select
N
Cable
and if it is
connected to ANT 1 IN (AIR), select
Air
.
If both ANT 1 IN and ANT 2 IN are connected, select the
N
Air+Cable
.
After all the available channels are stored, it starts to remove scrambled channels.
N
The Auto program menu then reappears.
If you want to stop Auto Programming, press the
N
ENTER
E
button.
The
Stop Auto Program?
message will be displayed. Select
Yes
by pressing the
◄ or ► button, then press the
ENTER
E
button.
Before contacting the Samsung after-sales service, perform the following simple checks.
N
If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact
your local dealer.
Antenna
: Air
►
Auto Program
Full Guide
Mini Guide
Default Guide
: Full Guide
Channel List
Fine Tune
LNA
: Off
Channel
02169A_CMS.indd 3
2009-09-08 �� 1:46:40
