Confidential
Chapter 2 Installing System
5G CPE Outdoor Installation Manual v1.0
16
Copyright © 2018, All Rights Reserved.
4
Check the level of mounting bracket on the pole and adjust the level, as
detailed in figure below.
Figure 11. Fixing Mounting bracket on the Pole (3)
When fixing the mounting bracket on the pole, be sure to check the level of
bracket. After finishing the installation, adjust the level minutely.
When poor leveling happens, adjust the position of fasteners used to fix the
mounting bracket.
To fix the CPE Outdoor on the pole mounting bracket
1
Ensure that the items mentioned in below table are available.
Table 5. Parts and Tools for Fixing CPE Outdoor on the Pole
Category
Description
Parts
Fasteners
M5 × L14 SEMS (T25H)
(Fastened to the unit bracket)
2 EA
Recommended Torque Value
M5 SEMS
25 lbf
in (29 kgf·cm)
Working Tools
Screw Driver Bit (T25H)
Torque Driver (20-90 lbf·in)
2
Hang the fasteners over the top groove of the pole mounting bracket, and
then
fix it using fasteners. This is depicted in figure below.
If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
