manualshive.com logo in svg

Samsung 570DX - SyncMaster - 57" LCD Flat Panel..., Руководство по обслуживанию, Страница: 6 / 122

Поделиться
Скачать
Samsung 570DX - SyncMaster - 57

3. Alignment and Adjustments

3-4

    

     

        

        

         

        

- Sharpness Part (1)

Adjusting the sharpness of displayed image.

- Sharpness Part (2)

Scaling Filter Sharpness Control - Peaking Y / Peaking UV

This adjusts the sharpness of luminance(Y) and color(UV).

The bigger the number is in the range of 1~127, the clearer

the picture is.   The bigger the number is in the range of

128~255, the more natural video is. Too high sharpness may

cause the vivid noise. 

Noise Coring Control - Peaking Coring

Display only the sharp large-edge without assuming the small-

edge of the video as a noise and amplifying it. 

NonLinear Sharpness Control - Peaking Resion1/2 Threshold, Gain

Divide the frequency area and apply the different Gain for each area rather

than evenly apply the sharpness level over the whole image.

Nonlinear Out

 

Assign the threshold value to
improve the sharpness.

Noise Coring Out

Содержание 570DX - SyncMaster - 57" LCD Flat Panel...



























































































































Отзывы:

Нет отзывов