Samsung 320MXN - SyncMaster - 32" LCD Flat Panel Display Скачать руководство пользователя страница 113

Страница: 113 / 114

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) -

Europe only

Business users should contact their supplier and

check the terms and conditions of the purchase con-

tract. This product should not be mixed with other

commercial wastes for disposal.

Correct disposal of batteries in this product - Europe only

(Applicable in the European Union and other Euro-

pean countries with separate battery return sys-

tems.)

This marking on the battery, manual or packaging in-

dicates that the batteries in this product should not

be disposed of with other household waste at the end

of their working life. Where marked, the chemical

symbols Hg, Cd or Pb indicate that the battery con-

tains mercury, cadmium or lead above the reference

levels in EC Directive 2006/66. If batteries are not

properly disposed of, these substances can cause

harm to human health or the environment.

To protect natural resources and to promote material

reuse, please separate batteries from other types of

waste and recycle them through your local, free bat-

tery return system.

Note

The rechargeable battery incorporated in this product is not user replaceable. For information

on its replacement, please contact your service provider.

Authority

Information in this document is subject to change without notice.

2009

Reproduction in any manner whatsoever without the written permission of Samsung Elec-

tronics Co., Ltd. is strictly forbidden.

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental

or consequential damages in connection with the furnishing, performance, or use of this ma-

terial.

Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows

and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC

are registered trademarks of Video Electronics Standard Association; the ENERGY STAR

name and logo are registered trademarks of the U.S. Environmental Protection Agency

(EPA). All other product names mentioned herein may be the trademarks or registered trade-

marks of their respective owners.

Appendix

Содержание 320MXN - SyncMaster - 32" LCD Flat Panel Display



















































































































Результаты поиска

Содержание 320MXN - SyncMaster - 32" LCD Flat Panel Display

Отзывы:

Похожие инструкции для 320MXN - SyncMaster - 32" LCD Flat Panel Display

Бренды по названию

Популярные бренды

Samsung 320MXN - SyncMaster - 32" LCD Flat Panel Display, Руководство пользователя

Результаты поиска

Содержание 320MXN - SyncMaster - 32" LCD Flat Panel Display

Отзывы:

Похожие инструкции для 320MXN - SyncMaster - 32" LCD Flat Panel Display

Бренды по названию

Популярные бренды