27
ENG
26
OPERA
TION
Test tone
Use the test tone check the speaker connection status or level.
√
To automatically output test tone
Press
SETUP/MENU
button, and then press the
ENTER
button.
•
“SETUP MODE” appears on the display and the unit goes into Setup Mode.
Press
button to select the “TEST-T AUTO”,
and then press the
ENTER
button.
•
Test signal will be automatically output as follows; F.L
➝
CEN
➝
F.R
➝
S.R
➝
SBR
➝
SBL
➝
S.L
➝
S.W .
•
During test signal output, press
…†
button to adjust the individual speaker
output level from -10 to +10 dB by 1 step.
1
2
To stop test tone
•
Press
SETUP/MENU
button once time.
“SETUP OFF” appears on the display and test tone stops.
Press
TEST TONE
button.
•
Test signal will be automatically output as follows; F.L
➝
CEN
➝
F.R
➝
S.R
➝
SBR
➝
SBL
➝
S.L
➝
S.W.
•
During test tone output, press
…†
button to adjust the speaker output level from
-10 to +10 dB by 1 step.
Using the Test Tone button
√
To Manually Output Test Tone
•
F.L (front left)
: -10 ~ +10dB
•
CEN (center)
: -10 ~ +10dB
•
F.R (front right)
: -10 ~ +10dB
•
S.R (surround right)
: -10 ~ +10dB
•
SBR (surround back right)
: -10 ~ +10dB
•
SBL (surround back left)
: -10 ~ +10dB
•
S.L (surround left)
: -10 ~ +10dB
•
S.W (subwoofer)
: -10 ~ +10dB
Test Tone Output
Press
SETUP/MENU
button, and then press the
ENTER
button.
•
“SETUP MODE” appears on the display and goes into Setup Mode.
Press
➛❿
button to select the “TEST-T MANU”, and then
press the
ENTER
button.
Press
➛❿
button to select the speaker you want..
•
Each time you press
➛❿
button, F.L
➝
CEN
➝
F.R
➝
S.R
➝
SBR
➝
SBL
➝
S.L
➝
S.W will be selected in turn.
Press
…†
button to set the test tone as you want.
•
You can adjust the speaker output level from -10 to +10dB by 1 step.
•
The sound gets quieter at -10dB and louder at +10dB.
1
2
3
4
To stop test tone
•
Press
SETUP/MENU
button once time.
“SETUP OFF” appears on the display and test tone stops.
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 26