10
Quick Start
In order for your wireless system to work correctly, both the receiver and transmitters must be set to
the same channel.
Follow this basic procedure for setting up and using your Stage 412 wireless system:
Physically place the SR412 receiver where it will be used, and fully extend the antennas
vertically. The general rule of thumb is to maintain “line of sight” between the receiver and
transmitter so that the person using or wearing the transmitter can see the receiver.
With the SR412 powered off, connect the included power adapter. Turn the SR412 on
momentarily to confirm that the unit is receiving power. You’ll see the LED displays light up.
Then turn the SR412 power off.
With your amplifier or mixer off and volume control all the way down, connect the SR412 receiver
XLR Mix Outputs or individual reciever 1/4” outputs or to the inputs of a mixer or amplifier. Turn
the Level knob on the SR412 completely counterclockwise, then turn its power on.
