Samson series 43, Перевод оригинальной инструкции

Страница: 29 / 56

EB 2430 EN 6-1
Start-up
6 Start-up
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
Re
Risk of personal injury due to process
medium escaping.
Î
Do not start up the regulator and control
thermostat until all parts have been
mounted.
Risk of burn injuries due to hot or cold
components and pipeline.
Control thermostat components and the pipe -
line may become very hot or cold. Risk of
burn injuries.
Î
Allow components and pipelines to cool
down or warm up to the ambient tem-
perature.
Î
Wear protective clothing and safety
gloves.
Risk of overheating due to excessive
ambient temperatures or insufficient heat
dissipation when components are insulated.
− Do not include the control thermostat in the
insulation of the pipeline.
DANGER !
WARNING !
NOTICE
!
NOTICE
!
Before start-up or putting the regulator back
into service, make sure the following condi-
tions are met:
− The regulator and control thermostat are
properly installed into the pipeline (see
the 'Installation' section).
− The leak and function tests have been
completed successfully (see the 'Testing
the control thermostat' section).
− The prevailing conditions in the plant
section concerned meet the control
thermostat sizing requirements (see
information under 'Intended use' in the
'Safety instructions and measures'
section).