Samson SAM HOME, Монтаж и эксплуатация

Страница: 19 / 82

EB 5660 EN 4-1
Shipment and on-site transport
4 Shipment and on-site trans-
port
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
4.1 Accepting the delivered
goods
After receiving the shipment, proceed as fol-
lows:
1. Compare the shipment received with the
delivery note.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent
(refer to delivery note).
4.2 Removing the packaging
from the gateway
Risk of device damage due to foreign parti-
cles entering it.
Î
Do not remove the packaging and pro-
tective films until immediately before
mounting.
1. Remove the packaging from the device.
2.
Check scope of delivery (see Fig. 4-1).
3. Dispose of the packaging in accordance
with the valid regulations.
1x Type 5660 SAM HOME Gateway
1x Document IP 5660
(Important Product Information)
1x RJ-45 cable, 8-pole
1x Network cable (LAN)
Fig. 4-1: Scope of delivery
4.3 Transporting the gateway
Î
Protect the device against external influ -
ences (e.g. impact).
Î
Protect the device against moisture and
dirt.
Î
Observe the permissible transportation
temperature of –10 to +60 °C.
4.4 Storing the gateway
Risk of device damage due to improper
storage.
Î
Observe the storage instructions.
Î
Avoid long storage times.
Î
Contact SAMSON in case of different
storage conditions or longer storage
times.
We recommend to regularly check the gate-
way and the prevailing storage conditions
during long storage periods.
NOTICE
!
NOTICE
!
Note