background image

S phantom Introduction and Features

Introduction

Congratulations on your purchase of the S phantom by Samson Audio! The S phantom is a two-
channel, 48-volt phantom power supply capable of powering most any condenser microphones, 
two at a time.  The S phantom is a perfect solution for applications where the use of condenser 
microphones is desired and the mixer, recorder, PA, or amplifier to be used does not provide 
phantom power on the microphone inputs. Whatever your exact situation, the S phantom 
will provide high quality and reliable performance thanks to its solid build construction based 
around the extruded aluminum chassis and oversized rubber bumper feet.

In this manual, you’ll find a more detailed description of the features of the S phantom, as well as 
a guided tour through the front and rear panels, step-by-step instructions for using the S phan-
tom, and full specifications. You’ll also find a warranty card enclosed—please don’t forget to fill it 
out and mail it so that you can receive online technical support and so we can send you updated 
information about other Samson products in the future.

S Phantom Features

• 

 Two channel, 48 volt phantom power supply for powering most condenser micro-
phones. 

• 

Two balanced XLR microphone inputs.

• 

Two balanced XLR microphone outputs. 

• 

 Convenient 1/4-inch phone jack output for Mic 1, for easy hook-up to many personal 
recorders without XLR inputs.

• 

Large rubber bumper feet.

• 

18 Volt DC adapter included.

• 

Three year extended warranty.

3

Sphantom_ownman.indd   3

7/19/04   10:31:17 PM

Содержание S-phantom









Отзывы: