OUTPUT
XLR and 1/4" jack
Key Input Connector
1/4" jack
Key Output Connector
1/4" jack
Dimensions
1.5/8" (h) x 8.5/8" (w) 7 1/4" (d)
41.5 mm (h) x 215 mm (w) x 184 mm (d)
Net Weight
5.5lbs., (2.5 kg)
Shipping Weight
8lbs., (3.6 kg)
S•Direct
Direct Box
Frequency Response
5-35 kHz, -3 dB
Noise Level (22-22kHz, Input Shorted)
-104 dBu
THD + N (10 Hz -22 kHz)
0.013% typ. @ 1 VRMS,1 kHz.
Input Impedance
(GTR) 1 Meg. Ohm
(SPK) 10 k Ohm
Max. Input Level (1% THD)
+8.1 dBu ( 9v. Batt.)
+11.3 dBu (48v. Phantom)
GTR/SPK Input
1/4
″
Phone Jack, unbalanced
OUTPUT/LINK
1/4
″
Phone Jack, unbalanced
BALANCED OUTPUT
XLR Connector, balanced
Phantom Power
24-48 VDC
Battery
9 Volt
Dimensions
2
″
(h) x 5.6
″
(w) x 4
″
(d)
50.8mm (h) 142mm (w) x 101.6mm (d)
Weight
15 oz. • .43 Kg
S•Monitor
Personal Monitor
Specifications TBD
S•Mix
5-channel Mixer
Specifications TBD
S•Amp
4-channel Headphone Amp
Specifications TBD
S•Convert
+4 to -10dB/-10 to +4dB Converter
Specifications TBD
Mixers
MDR6
Frequency Response
Mic to Main
5 Hz - 54 kHz
Line to Main
5 Hz - 54 kHz
Aux Return to Main
5 Hz - 98 kHz
Line to Aux Send
5 Hz - 57 kHz
T.H.D.
0.02%
Residual Noise (30 kHz LPF, all control Min)
Main
-89 dBu
Aux Send
-86 dBu
Crosstalk (@ 1 kHz w/ 30 kHz LPF)
Ch vs. Ch
75 dB
Input vs. Output
87.5 dB
Peak LED Sensitivity (before clipping)
5 dB
CLIP Indicators
Turn on: THD> 0.1%
Headphone output (600 ohm load)
100 mW
Maximum Input Level (1 kHz, ± 3dB)
Mic Input (Mono Ch)
10.5 dBu
Line Input (Stereo Ch)
7.6 dBu
Input Channel Equalizer (± 2dB)
High (shelving)
12 kHz ±15 dB
Mid (peaking)
2.5 kHz ± 15 dB
Low (shelving)
80 Hz ±15 dB
Meters 6 point LED meter (-20, -12, -6, 0, +6dB and PEAK)
Phantom Power
+48V
Power Consumption
300W 1/8 power, 540W full
Dimensions (W x D x H)
2.7
≤
(h) x 6.4
≤
(w) x 9
≤
(d)
69 mm (h) x 163 mm (d) x 228 mm (w)
Weight
4.5 lbs • 2.04 Kg
MDR8
Frequency Response (Trim @ Min, unity gain ± 3 dB)
Mic to Main
5 Hz - 54 kHz
Line to Main
5 Hz - 54 kHz
Aux Return to Main
5 Hz - 98 kHz
Line to Aux Send
5 Hz - 57 kHz
T.H.D.
0.02%
Residual Noise (30 kHz LPF, all control Min)
Main
-89 dBu
Aux Send
-86 dBu
Crosstalk (@ 1 kHz w/ 30 kHz LPF)
Ch vs. Ch
75 dB
Input vs. Output
87.5 dB
Peak LED Sensitivity (before clipping)
5 dB
CLIP Indicators
Turn on: THD> 0.1%
Headphone output (600 ohm load)
100 mW
Maximum Input Level
(1 kHz, ± 3dB)
Mic Input (Mono Ch)
10.5 dBu
Line Input (Stereo Ch)
7.6 dBu
Input Channel Equalizer
(± 2dB)
High (shelving)
12 kHz ±15 dB
Mid (peaking)
2.5 kHz ± 15 dB
Low (shelving)
80 Hz ±15 dB
Meters
6 POINT LED METERS (-20, -12, -6, 0, +6dB and
PEAK)
Internal DSP Effects
24 BIT -8 presets: 1 - Large Hall; 2 Medium Hall,
3 - Large Room; 4 - Vocal Room 1; 5 - Vocal
Room 2; 6 - Reverb; 7 -
Delay; 8 - Stairwell
Phantom Power
+48V
Power Consumption
300W 1/8 power, 540W full
Dimensions (W x D x H)
3 1/2
≤
(h) x 11 1/2
≤
(w) x 11 3/4
≤
(d)
89 mm (h) x 292mm (w) x 299mm (d)
Weight
6.5 lbs. • (3 Kg)
MDR 10
Specifications TBD
MDR 16
Specifications TBD
Mixpad 4
Mic EIN:
-128 dBu
Line EIN:
-111 dBu
Frequency response:
10 Hz to 54 kHz
Total harmonic distortion (with 30 kHz LPF):
.004%
EQUALIZATION
High (12 kHz):
±15 dB
Mid (2.5 kHz):
±12 dB
Low (80 Hz):
±15 dB
Battery operation:
Three 9V alkaline
Dimensions:
2.7
″
(h) x 6.4
″
(w) x 9
″
(d)
69 mm x (h) 163 mm (w) x 228 mm (d)
Weight:
1.85 lbs. • .839 kg.
Powered Mixers
TM300
MIXER/PREAMP SECTION
Frequency response (± 1 dB):
<20 Hz to 20 kHz
Total harmonic distortion:
< 0.02%
Graphic Equalizer:
7 band ±12 dB
Phantom power
+48 V
POWER AMP SECTION
Maximum output power (1 kHz):
150 W per channel into 4
Ω
Total harmonic distortion:
< 0.2%
Signal-to-noise ratio:
>100 dB
Frequency response (± 3 dB):
<12 Hz to 20 kHz
GENERAL
Power consumption:
780 w
Power requirements:
115 Vac • 50/60 Hz
230 Vac • 50 Hz
Dimensions:
5.5
″
(h) x 19.35
″
(w) x 13.75
″
(d)
139 mm (h) x 349 mm (w) x 491 mm (d)
Weight:
29.7 lbs. • 13.5 kg
TM500
MIXER/PREAMP SECTION
Frequency response (± 1 dB):
<20 Hz to 20 kHz
Total harmonic distortion:
< 0.02%
Graphic Equalizer:
7 band ±12 dB
Phantom power
+48 V
POWER AMP SECTION
Maximum output power (1 kHz):
250 W per channel into 4
Ω
Total harmonic distortion:
< 0.2%
Signal-to-noise ratio:
>100 dB
Frequency response (± 3 dB):
<12 Hz to 20 kHz
GENERAL
Power consumption:
1100 w
Power requirements:
115 Vac • 50/60 Hz
230 Vac • 50 Hz
Dimensions:
5.5
″
(h) x 19.35
″
(w) x 13.75
″
(d)
139 mm (h) x 349 mm (w) x 491 mm (d)
Weight:
36 lbs. • 16.4 kg
PA324
Rated Output power
150W/4
Ω
@0.5% THD at 1KHz per amplifier
Frequency response
20Hz~20KHz±0.5dB@1W Output into 8
Ω
(AMP
OUT)
20 Hz~20KHz ±0.5@+4dB Output into 10
Ω
(MAIN OUT, MONITOR OUT, EFX SEND)
Total Harmonic Distortion
< 0.1%@20Hz~20KHz, 75W output into4
Ω
(AMP OUT)
Less than 0.1%@20 Hz~20KHz+14dB output into
10K
Ω
(MAIN OUT, MON OUT, EFX SEND)
Hum & Noise
-121dB equivalent input noise
(Average, RS+150
Ω
)
-100dB residual output noise (MAIN OUT, MONI-
TOR OUT, EFX OUT)
(with 20Hz~20KHz BPF)
-79dB (MAIN OUT, MONITOR OUT) Master level
control at maximum all channel level control at
minimum.
-79dB (EFX OUT) Master level control at maxi
mum all channel level controls at minimum
Crosstalk 1KHz
70dB adjacent input, 70dB input to output
Input Channel Equalization
HIGH
12KHz shelving (± 15dB Maximum)
MID
2.5KHz peaking (± 12dB Maximum)
LOW
80Hz shelving (± 15dB Maximum)
Meters
7 POINT LED METERS (-20, -10, -7, -4, 0, +3, +6dB)
Graphic Equalizer
7 bands (63, 160, 400, 1K, 2.5K, 6.4K, 16KHz)
Internal DSP Effects
24 BIT - 8
Dimensions
19.25
″
(w) x 11.25
″
(h x 11.4
″ (
d)
489mm (w) x 286mm (h) x 289mm (d)
Weight
32.3 lbs.•14.7Kg
Power Distribution & Rack Gear
S Patch Plus
48 Channel, fully Balanced patchbay
Channel
48
Switchable configuration modes
Normal, Half-normal and Thru
Dimensions
1 3/4
″
(h) x 19
″
(w) x 3
″
(d)
44.45 mm (h) x 482.6 mm (w) x 76.2 (d)
Weight
3.8 lbs. • (1.72 Kg)
PowerBrite Pro7/Pro9
Number of Outlets
Pro7:
6 switched, 1 unswitched
Pro9:
8 switched, 1 unswitched
Max. Current:
Pro7 15 Amps/Pro9 10 Amps
Input Voltage (RMS):
Pro7 130 Vac/Pro9 245 Vac
Spike Protection Mode:
Hot to Neutral, Hot to Ground,
and Neutral to Ground
Max. Clamping Voltage (@ 50 A):
700 Vac
Response Time:
1 nanosecond
Max. Surge Current:
4,500 Amps (8 x 20 ms pulse)
Max. Spike Energy:
104 Joules
Noise Attenuation:
> 20 dB, 1.5 MHz to 200 MHz
AC Inlet:
PS9 North America/PS11 IEC
Lamp/Starter:
Fluorescent F45CW condenser type FS2
Lamp Life:
3000 hours 95 Lumens
Starter Fuse (Internal):
500 ma T type
Dimensions:
1.75
″
(h) x 19
″
(w) x 7.5
″
(d)
44 (h) x 482 mm (w) x 190 (d)
Weight:
7 lbs. • 3.2 kg
Conforms:
UL/CUL/CE/LVD
PowerBrite PB9/PB11
Number of Outlets
PB9:
8 switched, 1 unswitched
PB11:
10 switched, 1 unswitched
Max. Current:
PB9 15 Amps/PB11 10 Amps
Input Voltage (RMS):
PB9 130 Vac/PB11 245 Vac
Spike Protection Mode:
Hot to Neutral, Hot to Ground,
and Neutral to Ground
Max. Clamping Voltage (@ 50 A):
700 Vac
Response Time:
1 nanosecond
Max. Surge Current:
4,500 Amps (8 x 20 ms pulse)
Max. Spike Energy:
104 Joules
Noise Attenuation:
> 20 dB, 1.5 MHz to 200 MHz
AC Inlet:
PS9 North America/PS11 IEC
Lamp/Starter:
Fluorescent F45CW condenser type FS2
Lamp Life:
3000 hours 95 Lumens
Starter Fuse (Internal):
500 ma T type
Dimensions:
1.75
″
(h) x 19
″
(w) x 7.5
″
(d)
44 (h) x 482 mm (w) x 190 (d)
Weight:
7 lbs. • 3.2 kg
Conforms:
UL/CUL/CE/LVD
PowerStrip PS9/PS11
Number of Outlets
PS9:
8 switched, 1 unswitched
PS11:
10 switched, 1 unswitched
Max. Current:
PS9 15 Amps/PS11 10 Amps
Input Voltage (RMS):
PS9 130 Vac/PS11 245 Vac
Spike Protection Mode:
Hot to Neutral, Hot to Ground,
and Neutral to Ground
Max. Clamping Voltage (@ 50 A):
700 Vac
Response Time:
1 nanosecond
Max. Surge Current:
4,500 Amps (8 x 20 ms pulse)
Max. Spike Energy:
104 Joules
Noise Attenuation:
> 20 dB, 1.5 MHz to 200 MHz
AC Inlet:
PS9 North America/PS11 IEC
Dimensions:
1.75
″
(h) x 19
″
(w) x 7.5
″
(d)
44 (h) x 482 mm (w) x 190 (d)
Weight:
7 lbs. • 3.2 kg
Conforms:
UL/CUL/CE/LVD
Audio Equipment
Resolv 50a
Rated Output Power
Low frequency amp:
50 watts @1K into 4ohms
High frequency amp:
25 watts @ 10K into 4ohms
Frequency Response:
Low amp:
tbd
High amp:
tbd
Distortion THD:
tbd
Power consumption:
75 watts
Frequency response:
tbd
Driver:
5.25" Woofer Shielded
Tweeter:
1
″
Dome Shielded
Dimensions:
tbd
Weight:
tbd
Resolv 65a
Rated Output Power
Low frequency amp:
75 watts @1K into 4ohms
High frequency amp:
30 watts @ 10K into 4ohms
Frequency Response:
Low amp:
40hz-3200
High amp:
3200-50K
Distortion THD:
<.05%
Power consumption:
150 watts
Frequency response:
40 Hz to 20 kHz
Driver:
6 1/2" Woofer Shielded
Tweeter:
1
″
Dome Shielded
Dimensions:
13 5/8"(H) x 8 1/2" (W) x 9 7/8" (D)
Weight:
18 lbs. • 8.2 kg
Resolv 65
Power Rating:
75 watts
Impedance:
8 ohm
Frequency response:
40 Hz to 20 kHz
Driver:
6 1/2
″
Woofer Shielded
Tweeter:
1
″
Dome Shielded
Dimensions:
13 5/8"(H) x 8 1/2" (W) x 9 7/8" (D)
Weight:
13.4 lbs. • 6.1 kg
Resolv 80a
Rated Output Power
Low frequency amp:
75 watts @1K into 4ohms
High frequency amp:
25 watts @ 10K into 4ohms
Frequency Response:
Low amp:
tbd
High amp:
tbd
Distortion THD:
tbd
Power consumption:
100 watts
Frequency response:
tbd
Driver:
8" Woofer Shielded
Tweeter:
1
″
Dome Shielded
Resolv Sub 120
Amp:
120watts into 4ohms
Frequency Response:
30hz-150
Distortion THD:
<.05%
Power consumption:
210 watts
Driver:
10
″
long stroke
Dimensions:
14 1/2
″
(H) x 14 1/2
″
(W) x 17.5
″
(D)
Weight:
39 lbs. • 17.75 kg
Expedition Express
Power Rating: (@ 8
Ω
):
250 Watts Program
Frequency Response:
60 Hz – 15 kHz ± 3 dB
Sensitivity:
97 dB SPL @ 1W/1m
Crossover Frequency:
2.3 kHz (12 dB Per Octave)
LF Driver:
12
≤
heavy-duty driver ,
2.5
≤
voice coil (Kapton Former),
50 oz. barium ferrite magnet
HF Driver: 1
≤
titanium compression driver
Stereo Mixer Section:
Inputs
2 Mic/Line XLR/TRS,
1 Stereo Line w/Mic XLR
Frequency Response
10 Hz - 50 kHz
Crosstalk
70 dB @ 1 kHz
Equalization Frequencies
100 Hz (Low), 10 kHz (High)
Effects
DSP Reverb with 6 Presets
Mounting:
Integral 1 3/8
≤
Pole Mount Receptacle, Fly Points
Dimensions: EX250m and EX250e
21 1/4 (h) x 14 5/8 in. (w) x 17 3/8 (d)
539 mm (h) x 371 mm (w) x 441 (d)
Weight:
EX250e
28.5 lbs • 12.9 kg
EX250m
45.0 lbs • 20.4 kg
XP100
Power Rating:
250 Watts Program; 400 Watts Max. Peak
Frequency Response
60 Hz – 15 kHz
Sensitivity
97 dB SPL @ 1W/1m
Crossover Frequency
2.3 kHz (24 dB Per Octave)
LF Driver
12
″
heavy-duty driver
2.5
″
voice coil (Kapton Former)